Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 

Laboratory and UV Products

 UVP has a large selection of high intensity and display type ultraviolet lamps to accommodate many applications and budgets. Refer to Ultraviolet Hand Lamps section for smaller scale lamp models.

Bench and Display Lamps:

  • New 25 watt -225 Mineralight Lamps
  • UVGD-68 Display Lamps
  • XX Series Bench Lamps
  • BL-15 Bench Lamp
  • R-52G Grid Bench Lamp
  • B-100 Series High Intensity Lamps

Intensity Meters

J-Series UV Meters

These meters are photovoltaic devices for taking accurate and repeatable readings of UV light sources. Model J-225 measures the intensity of shortwave UV (254nm). Each meter comes with a sensor, attenuation screen and filter. This meter's sensor is sensitive within a range from 220 to 280nm with maximum sensitivity at 254nm. Longwave readings are made with the J-221 Meter. It's sensor is sensitive from 300 to 400nm with a peak sensitivity at 365nm. J-221 Meter complies with MIL STD 45662-A and can be found in MIL-I-6868D (NSN 6635-488-5451).

Each meter features two scales for low and high intensity readings. For remote readings, a four foot (1.2m) cord connects the sensor to the meter. Two scales measure a wide range of intensity. An infrared filter assures accurate readings when measuring light sources producing infrared radiation. The 5X attenuation screen can be used for very high intensity lamp measurements.


UVX Radiometer

This digital UVX Radiometer is used with one of the three interchangeable sensors (ordered separately) for measuring 254nm, 365nm and 302nm UV wavelengths. All sensors are calibrated with traceability to the National Institute of Standards and Technology (NIST) and UVP's published standards. In the UK or other European countries, traceability to the National Physical Laboratory (NPL) is available. Recalibration of the sensors is recommended every six months at the UVP factory. Unit includes a port for attachment of a chart recorder (user provided).

The UVX's range switch provides selection from three intensity ranges:

0 to 20 mW/cm2, 0 to 2000 microW/cm2 and 0 to 200 microW/cm2. The chart recorder port, standard on the UVX, allows for continuous monitoring. The 10:1 attenuator extends the reading range up to 200mW/cm2. The UVX Radiometer is powered by a 9-volt battery for up to 120 hours.

 

Bench and Display UV Lamps

UVL-225D


Dimensions: 18.5"L x 4.75"W x 5"H (470 x 114 x 89mm)

Mineralight Display Lamps

Display lamps use two 25-watt high performance tubes providing hours of UV illumination for fluorescence, sterilization or inspection applications.  Each lamp comes with adjustable handles and mounting bracket for hanging.

UVL-225D 365nm UV 95-0190-01(115V) / 95-0190-02 (230V)
UVS-225D 254nm UV 95-0191-01(115V)/95-0190-02(230V)
UVM-225D 302nm UV 95-0189-01(115V)/95-0189-02(230V)
UVLS-225D 365/254nm 95-0192-01(115V)/95-0192-02(230V)

 

UVGD-68

UVGD-68 Display Lamp

This shortwave, high intensity UV lamp is excellent for large scale display of minerals. Lamp grid is rated at 20,000 hours of use. Adjustable handles/brackets are supplied for easy mounting.

XX-15

XX-Series Display/Bench Lamps

Bench lamp line is expanded to offer a complete selection of models -- fixture only or two tubes each of the following wavelengths: longwave, BLB (black light blue), shortwave or midrange. Products for use with the XX-15 Lamps include: Filter covers and clear covers can be attached the lamp. New XX-20 series and XX-40 Bench Lamps offer a greater area of illumination. Models are available with either BLB or shortwave UV. The shortwave models are designed to use in sterilization applications.

XX-15 Exposure Stand

Exposure Stand

The XX-15 Lamp connects to the new Exposure Stand which provides a platform for UV fluorescence experimentation. The shelf is adjustable to different levels for repeatable exposure of samples.

 

BL-15

BL-15 Illumination Lamps

This longwave UV lamp is ideal for inspection applications in inaccessible places.

R-52

R-52 Grid Lamp - Shortwave UV

The R-52 Grid Lamp's uniform source of high-intensity shortwave UV is for applications including bacteria destruction, sterilization and photochemistry. A filter assembly can be easily attached to convert this lamp for fluorescent analysis. UVP's special UVG shortwave filter reduces solarization, prolonging the filter life. Lamp mounts securely in its transformer base or detach the lamp for movement around  your work area. Primary electrical cord: 8 feet (2.4m) and secondary electrical cord: 3 feet (0.9m).     

High Intensity Longwave UV Lamps

High intensity ultraviolet lamps are available with the Cool-Touch heat-resistant housing (B-100AP, B-100AP/R, B-100SP, B-100YP, B-100EP) or the metal fabricated lamp housing (B-100A, B-100A/R, B-100Y).  See below for additional specifications.

B-100SP

B-100SP

Model B-100SP comes with a self-ballasted 160 watt longwave bulb. Other features include: 

Cool-Touch plastic, heat-resistant lamp housing and pistol-grip handle

 Special bulb protector

 On/off switch located on the handle

 This lamp is recommended for use in leak detection applications.

B-100AP

B-100AP

Models feature same longwave UV and Cool-Touch housing and spot bulb and ballast base. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. B-100AP/R (not shown) offers a longer cord lengths - 20 foot (6.1m) primary and secondary cord lengths. Accessories: Finger guard, lamp funnel, lamp visor

B-100A

B-100A

The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included.

Accessories: Lamp Visor

B-100AR

B-100A/R and B-100AP/R

These longwave lamps feature 100 watts of power excellent for inspection applications. B-100A/R (shown) and B-100AP/R offers a longer cord lengths - 20 foot (6.1m) primary and secondary cord lengths. B-100A/R is designed with the aluminum housing; B-100AP/R with a Cool-Touch housing.

B-100YP

B-100Y and B-100YP

Models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. B-100Y is built with the aluminum housing; B-100YP plastic housing.

Excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm.

Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com