Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

SUBURBAN TOOL, INC. has 40+ years experience in manufacturing the highest quality workholding tool products and inspection equipment.

Suburban's products are manufactured by using exacting procedures. These products are intended for use by knowledgeable and experienced people. Take time to review the ever growing product line shown below. The products shown are proudly MADE IN THE USA!
.

MAGNETIC SINE PLATES

  • All chucks use ceramic magnets for superior holding power.
  • Chucks are lubricated and sealed against dirt and liquids.
  • Removable handle and two rails are included with chuck.
  • Gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets.
  • Models with the suffix "S0, S1 OR S2" are part of the SineSet® System. The chuck can be removed and other products with the same part number suffix will bolt directly to these sine plates.
  • Sine plate includes two self-storing, hardened & ground rails.
  • Sine plate portion made of steel, hardened to Rc 58-62.
  • The magnetic chuck can be quickly removed OR replaced on SineSet® models (those with part number suffix S0, S1 OR S2 ) using only four bolts, allowing the individual use of both the sine plate and magnetic chuck.



  • STANDARD POLE: 1/4" poles and 1/8" separators produce deep flux lines for holding large and thick parts.
  • FINE POLE: (marked - FP) 1/8" poles and 1/8" separators produce shallow flux lines for holding small and thin parts.
MODEL SIZE CENTER DISTANCE
OF ROLLS		 SQUARE &
PARALLEL		 WT(#) PRICE*
MSP-363-FP**
MSP-44-FP-S0
MSP-66**
MSP-66-FP**
MSP-66-S1
MSP-66-FP-S1
MSP-612-S2
MSP-612-FP-S2
MSP-126-S2
MSP-126-FP-S2
MSP-618-S2
MSP-618-FP-S2
MSP-186-S2
MSP-186-FP-S2
MSP-812-S2
MSP-812-FP-S2
MSP-128-S2
MSP-128-FP-S2
MSP-1212-S2
MSP-1212-FP-S2
MSP-1218-S2
MSP-1218-FP-S2
MSP-1812-S2
MSP-1812-FP-S2
MSP-1224-S2
MSP-1224-FP-S2
MSP-2412-S2
MSP-2412-FP-S2		 3" x 6" x 4-1/4"
4" x 4" x 4-5/8"
6" x 6" x 4-1/4"
6" x 6" x 4-1/4"
6" x 6" x 4-5/8"
6" x 6" x 4-5/8"
6" x 12" x 5-1/4"
6" x 12" x 5-1/4"
12" x 6" x 5-1/4"
12" x 6" x 5-1/4"
6" x 18" x 6"
6" x 18" x 6"
18" x 6" x 6"
18" x 6" x 6"
8" x 12" x 5-1/4"
8" x 12" x 5-1/4"
12" x 8" x 5-1/4"
12" x 8" x 5-1/4"
12" x 12" x 5-1/4"
12" x 12" x 5-1/4"
12" x 18" x 6"
12" x 18" x 6"
18" x 12" x 6"
18" x 12" x 6"
12" x 24" x 6-5/8"
12" x 24" x 6-5/8"
24" x 12" x 6-5/8"
24" x 12" x 6-5/8"		 5" ±0.0002"
3" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
5" ±0.0002"
10" ±0.0002"
10" ±0.0002"
5" ±0.0002"
5" ±0.0002"
15" ±0.0003"
15" ±0.0003"
5" ±0.0002"
5" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0002"
10" ±0.0003"
10" ±0.0003"
15" ±0.0003"
15" ±0.0003"
10" ±0.0004"
10" ±0.0004"
20" ±0.0004"
20" ±0.0004"		 0.0002"
0.0002"
0.0002"
0.0002"
0.0002"
0.0002"
0.0003"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
0.0004"
0.0004"
0.0003"
0.0003"
0.0003"
0.0003"
0.0003"
0.0003"
0.0004"
0.0004"
0.0004"
0.0004"
0.0005"
0.0005"
0.0005"
0.0005"		 22
21
35
39
39
43
89
94
87
92
155
160
149
160
120
125
118
123
190
196
321
330
318
327
475
485
469
479		 $809.00
903.00
1,127.00
1,222.00
1,197.00
1,283.00
1,852.00
1,967.00
1,754.00
1,863.00
4,061.00
4,212.00
4,061.00
4,212.00
2,331.00
2,468.00
2,374.00
2,510.00
3,923.00
4,093.00
7,241.00
7,421.00
7,241.00
7,421.00
11,095.00
11,460.00
11,095.00
11,460.00

** Chucks are not removable on these models and are not SineSet® Compatible.
* PRICES SUBJECT TO CHANGE WITHOUT NOTICE
SPECIAL SIZES AVAILABLE UPON REQUEST

Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com