Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 

Sonatest supply a wide variety of Ultrasonic and other Non destructive testing instrumentation

Microgage II

Introducing the MICROGAGE II the new precision thickness gauge from the Sonatest Group.

Designed with the user in mind, the MICROGAGE II utilises state-of-the-art digital technology to produce fast and accurate readings

PACKAGING Is an aluminium sealed case, protecting the unit in the harshest of working environments.

SIZE 63.5 mm W x 120.7 mm H x 31.8 mm D. Small and portable, the Microgage II operates on 2 AA batteries for 150 hours plus.

The Microgage II has the following features:

  • Alarm mode
  • Differential Mode
  • RS 232 data output port MEASURING RANGE. From 0.15 to 25.40 mm (0.0060 to 1.0000 ins)
  • ECHO-TO-ECHO MODE available to measure thin materials.
  • Switches automatically to INTERFACE ECHO MODE when measuring thicker materials and plastics.

The new MICROGAGE II is a simple to use hand-held Precision Thickness Gauge. The variety of features offered by the MICROGAGE II allows the user to select a quality tool that will exceed their application needs. The Echo-to-Echo allows the measurement of the thickness of materials without removing paint or coatings.

The MICROGAGE II comes as a complete kit, ready to use, and is backed by 5 year limited warranty.
Microgage II Specification:
PHYSICAL: Weight:285 g with batteries (10 ounces)
Size: 63.5W120.7Hx31.8Dmm 2.5 W" x 4.75" H x 1.25" D
Operating Temperature:-30 ° to 50 ° C (-20 ° to 120 ° F )
Case:Extruded aluminium body with nickel-plated aluminium end caps.Resistant to impact and environmentally sealed.
DISPLAY:

Multi-function 4.5 digit LCD with 0.500 inch numerals.Backlight is selectable: on / off / auto ( illuminates only when taking a
measurement ).Measurements displayed in millimetres and metres/second or inches and inches/microsecond,Bar graph to indicate reading stability.
MEASURING:

Overall Range: Measures from 0.15 to 25.40 mm
(0.0060 to 1.0000 inches). Switch to select English or metric units.

Resolution:0.001 mm (0.0001 inches)

Velocity Range: 1250 to 10,000 m/sec (0.0492 to 0.3937 in/ps)
KEYPAD:

Sealed membrane resistant to both water and petroleum products.Six tactile-feedback keys.
POWER SOURCE: Two 1.5V alkaline or 1.2V NiCad AA cells.Typically operates for 150hours on alkaline and 100 hours on NiCad. Display flashes when battery is low.Unit turns off automatically when battery is too low to operate reliably.
TRANSDUCERS: Single element with delay tip 10 - 22 MHz frequency range Locking quick disconnect LEMO connector.4 foot cable. Custom transducers available for special applications.
CERTIFICATION: Factory calibration traceable to national standards.
WARRANTY: 5 year limited.
MEASURING MODES: Interface to Echo, Echo-to-Echo (through paint) and Auto-Switchable

Four readings per second for single point measurements or 8 per second in Scan Mode-captures the minimum thickness. Single point calibration
FEATURES: DIFFERENTIAL MODE:Enter the acceptable thickness value, unit will display +/- the difference from the value entered.

ALARM MODE:Enter a minimum acceptable thickness value. If the measurement falls below the minimum, a red LED will illuminate and an alert beeper will sound.If measurement is above minimum value a green LED will illuminate.

DATA OUTPUTRS232 output sends data to a serial printer, a computer or other external storage devices.
Prepaid wire transfer required for all international orders  
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2003-2010
Tel: (713) 943-2721 e-mail: sales@deterco.com