Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 

PILogo (2K)

Since 1938 Precision Instruments has manufactured the torque products that industry depends on. Whether the application involves delicate fasteners at 8 ounce inch of torque, or massive bolts at 10,000 pound foot.

Repair tools

Please contact us for additional information regarding the repair or service of Precision torque products.

D & DX Dial Type Series

DS Dial (Screwdriver) Series

C Series

M1 Series

M2 & M3 Series

D & DX Dial Type Series Service Tools

Part No.   Description Used on (models)
TQN59 Click to Enlarge Outer Dial Ring Remover all direct reading dial types.
TQN61 Click to Enlarge Pointer Remover all direct reading dial types.
TQN156 Click to Enlarge Dial Staking Tool 1/4 square drive - 3/4 square drive (series),  DX4F (series), and DS (series) (all non-lighted models only).
TQN179 Click to Enlarge Rivet Setter 3/4 square drive (series) cases dial guards 3/4 square drive - 1 square drive Series (for Chicago Riveter only), use with TQN396, Rivet Adapter Setting Tool when using a Shepard Thomason Riveter.
TQN180 Click to Enlarge Lower Anvil 3/4 square drive (series) Dial Guards 3/4 square drive - 1 square drive series used on the Chicago Rivet Riveter only.
TQN203 Click to Enlarge Light Case Rivet Setter All direct reading dial types with optional light signal only (for Chicago Riveter only), use with TQN396, Rivet Adapter Setting Tool when using a Shepard Thomason Riveter.
TQN204 Click to Enlarge Lower Anvil all direct reading dial types with optional light signal only used on the Chicago Rivet Riveter only.
TQN217 Click to Enlarge Beam Adjuster All direct reading dial types except DS series.
TQN218 Click to Enlarge Nut Inserter all direct reading dial types.
TQN219 Click to Enlarge Access Cover Wrench all direct reading dial types with access cover.
TQN220 Click to Enlarge Swing Tool 1/4 square drive - 3/8 square drive (series).
TQN221 Click to Enlarge Swing Tool 1/2 square drive - 1-1/2 square drive (series) all TEX (series).
TQN222 Click to Enlarge Auto Point Setter (large) 3/4 square drive - 1-1/2 square drive (series), all DX and DS (series).
TQN222A See Part No. TQN514 Auto Point Setter (small) **See Part No. TQN514.
TQN223 Click to Enlarge Screwdriver Adapter All direct reading dial types (comes with 1/4’’ female drive) optional DS1F1.5H or DSS1F1.5H (series) required.
TQN226 Click to Enlarge Nut and Screw Inserter All direct reading dial types (except DS series).
TQN227 Click to Enlarge Dial Remover all direct reading dial types
TQN228 Click to Enlarge tool Base (holder) 1/4 square drive - 3/4 square drive (series)
TQN393 Click to Enlarge Lower Anvil 1/4 square drive - 1/2 square drive series only (case), all direct reading dial type with movements (1TQP) used on the Shepard Thomason Riveter only.
TQN394 Click to Enlarge Lower Anvil 3/4 square drive (series) dial guards 3/4 square drive - 1 square drive Series used on the Shepard Thomason Riveter only.
TQN395 Click to Enlarge Lower Anvil all direct reading dial types with optional light signal only, used on the Shepard Thomason Riveter only.
TQN396 Click to Enlarge Rivet Adapter setting tool adapter to be used with TQN179, TQN518, TQN203 AND T-740 (rivet setters) used on the Shepard Thomason Riveter only.
TQN504 Click to Enlarge Pointer Spacer Gauge all direct reading dial types.
TQN514 Click to Enlarge Auto Point Setter (small) 1/4 square drive - 1/2 square drive (series).
TQN515 Click to Enlarge Lower Anvil 1/4 square drive - 1/2 square drive series only (including DX4 thru DX6 case) (case), all direct reading dial types with movements (1TQP), used on the Chicago Rivet Riveter only, old number was TQN222A.
TQN518 Click to Enlarge Rivet Setter 1/4 square drive - 1/2 square drive series only dial guards (for Chicago Riveter only) use with TQN396, rivet adapter setting tool when using a Shepard Thomason Riveter.
TQN522 Click to Enlarge Spring Pin Insertion Tool Used for the insertion of the spring pin into the lock plug assembly used on the following Extension Handle models: 92TQPA, 93TQPA, 94TQPA, 229TQPA, TE91TQPA & model CP3F250F
TQN545 Click to Enlarge Lower Anvil for D1 - D3 case & movements and all lighted models without beam assembly. Upper Rivet Setters and Lower Anvils For the Chicago Rivet Model 915-1 (hand setter) Light cases can be done if the beam assembly is not on the unit. If the beam assembly is on the unit, then the unit has to be sent to the service center for assembly.
TQN546 Click to Enlarge Upper Rivet Setter for D1 - D3 case & movement all lighted models, Upper Rivet Setters and Lower Anvils For the Chicago Rivet Model 915-1 (hand setter) Light cases can be done if the beam assembly is not on the unit. If the beam assembly is on the unit, then the unit has to be sent to the service center for assembly.
TQN547 Click to Enlarge Lower Anvil for D1 - D3 dial guards only, Upper Rivet Setters and Lower Anvils for the Chicago Rivet Model 915-1 (hand setter)
TQN548 Click to Enlarge Upper Rivet Setter for D1 - D3 dial-guards only (tapered tip). Upper Rivet Setters and Lower Anvils. For the Chicago Rivet  Model 915-1 (hand setter).
TQN549 Click to Enlarge Lower Anvil for D4 case rivets D4 - D5 dial guards, Upper Rivet Setters and Lower Anvils For the Chicago Rivet Model 915-1 (hand setter)
TQN550 Click to Enlarge Upper Rivet Setter for D4 - D5 dial guards, Upper Rivet Setters and Lower Anvils. For the Chicago Rivet Model 915-1 (hand setter)
TQN551 Click to Enlarge Upper Rivet Setter for D4 cases, Upper Rivet Setters and Lower Anvils. For the Chicago Rivet  Model 915-1 (hand setter)
T-740 Click to Enlarge Rivet Setter 1/4 square drive - 1/2 square drive series only (including DX4 thru DX6 case) (case), and all direct reading dial types with movements (1TQP). Supplied by Chicago Rivet (their part number, part modified) use with TQN396, rivet adapter setting tool when using a Shepard Thomason Riveter (can not be used with the Model 915-1 Bench Riveter).
T-176 Click to Enlarge Rivet Setter 3/4 square drive series case and dial guards only. Supplied by Chicago Rivet (their part number, part modified) use with TQN396, rivet adapter setting tool when using a Shepard Thomason Riveter (can not be used with the Model 915-1 Bench Riveter).
Model 915-1 Click to Enlarge Bench Riveter (hand setter) The Model 915-1 Bench Riveter (hand setter) (Chicago Rivet & Machine Co.) is for all Direct Reading Dial Types requiring riveting. This model is the only replacement (to date) for the older Chicago Rivet and Shepard Thomason Riveter. The following anvils and setters can be used with the Model 915, TQN545, TQN546, TQN547, TQN548, TQN549, TQN550, and TQN551.
DS1F1.5H or DSS1F1.5H Click to Enlarge Torque Screwdriver all direct reading dial types (except DS’s)
- - Duckbill Pliers  (Not Shown) -
- - Small Screwdriver  (Not Shown) -

Top

DS Dial (Screwdriver) Series Service Tools

Part No. Description Used on (models)
TQN59 Click to Enlarge Outer Dial Ring Remover all direct reading dial types.
TQN61 Click to Enlarge Pointer Remover all direct reading dial types.
TQN156 Click to Enlarge Dial Staking Tool 1/4 square drive - 3/4 square drive (series),  DX4 (series), and DS (series) (all non-lighted models only).
TQN222 Click to Enlarge Auto Point Setter (large) 3/4 square drive - 1-1/2 square drive (series), all DX and DS (series).
TQN227 Click to Enlarge Dial Remover all direct reading dial types
TQN393 Click to Enlarge Lower Anvil 1/4 square drive - 1/2 square drive series only (case), all direct reading dial type with movements (1TQP) used on the Shepard Thomason Riveter only.
TQN515 Click to Enlarge Lower Anvil 1/4 square drive - 1/2 square drive series only (including DX4 thru DX6 case) (case), all direct reading dial types with movements (1TQP), used on the Chicago Rivet Riveter only, old number was TQN222A.
TQN545 Click to Enlarge Lower Anvil for D1 - D3 case & movements and all lighted models without beam assembly. Upper Rivet Setters and Lower Anvils For the Chicago Rivet Model 915 (hand setter) Light cases can be done if the beam assembly is not on the unit. If the beam assembly is on the unit, then the unit has to be sent to the service center for assembly.
TQN546 Click to Enlarge Upper Rivet Setter for D1 - D3 case & movement all lighted models, Upper Rivet Setters and Lower Anvils For the Chicago Rivet Model 915 (hand setter) Light cases can be done if the beam assembly is not on the unit. If the beam assembly is on the unit, then the unit has to be sent to the service center for assembly.
Model 915 Click to Enlarge Bench Riveter
(hand setter)
The Model 915 Bench Riveter (hand setter) (Chicago Rivet & Machine Co.) is for all Direct Reading Dial Types requiring riveting. This model is the only replacement (to date) for the older Chicago Rivet and Shepard Thomason Riveter. The following anvils and setters can be used with the Model 915, TQN545, TQN546, TQN547, TQN548, TQN549, TQN550, and TQN551.
T-740 Click to Enlarge Rivet Setter 1/4 square drive - 1/2 square drive series only (including DX4 thru DX6 case) (case), and all direct reading dial types with movements (1TQP). Supplied by Chicago Rivet (their part number, part modified) use with TQN396, rivet adapter setting tool when using a Shepard Thomason Riveter (can not be used with the Model 915 Bench Riveter).
-

-

Duckbill Pliers (Not Shown) ---

Top

C Series Service Tools

Part No. Description (click to enlarge picture) Used on (models)
TQN293 Click to Enlarge Calibration Button Rotor ALL
TQN340 Click to Enlarge Lash Cap Rotor All 1/2" & 3/4 sq. dr. Models
TQN341 Click to Enlarge Ratchet head support jig All 1/2"sq. dr. Models
TQN342 Click to Enlarge Lock spring inserter/remover All 1/2" & 3/4 sq. dr. Models
(Except presets)
TQN344 Click to Enlarge Dial Gear Inserter All 1/2" & 3/4 sq. dr. Models
TQN385A Click to Enlarge Lock spring inserter/remover All 3/8"sq. dr. Models
TQN386 Click to Enlarge Dial Gear Inserter All 3/8"sq. dr. Models
TQN388 Click to Enlarge Lash cap rotator All 3/8"sq. dr. Models
TQN508

---

C-Clamp beam adjuster  (Not Shown) All 1/2" & 3/4 sq. dr. Models
TQN382 Click to Enlarge Ratchet head support jig All 3/8"sq. dr. Models
TQN505 Click to Enlarge Ratchet head support jig All 1/2"sq. dr. Models
TQN509 Click to Enlarge Diamond File ALL

Top

M1 Series Service Tools and Fixtures
Click on picture to enlarge.

Item No.

Description

TQN539 Click to Enlarge Balance Cam Adjusting Tool
TQN540 Click to Enlarge Spring Rate Adjusting Tool
TQN561 Click to Enlarge Torque Wrench Support Fixture
TQN562 Click to Enlarge Plunger Assembly Fixture
TQN563 Click to Enlarge Lock Ring Retainer Removal Set (Includes TQN563-1, TQN563-2, TQN563-3 AND  TQN564)
TQN563-1 Click to Enlarge Lock Ring Retainer Removal Insert
TQN563-2 Click to Enlarge Lock Ring Retainer Removal Screw
TQN563-3 Click to Enlarge Lock Ring Retainer Removal Handle
TQN564 Click to Enlarge Press Fixture for Lock Ring Retainer
-

-

Awl (Optional) (Not Shown)

Top

M2 & M3 Series Service Tools and Fixtures
Click on picture to enlarge.

Item No.

Description

TQN384 Click to Enlarge Mandrel (M2FR series only)
TQN526 Click to Enlarge Balance Cam Adjusting Tool (M2 only)
TQN527 Click to Enlarge Spring Rate Adjusting Tool (M2 only)
TQN541 Click to Enlarge Ratchet Head Support Jig (M2FR series only)
(For removing & installing ratchet pin)
TQN542 Click to Enlarge Torque Wrench Support Fixture
TQN543 Click to Enlarge Plunger Assembly Fixture
TQN556 Click to Enlarge Lock Ring Retainer Removal Set
(Includes TQN557, TQN558, TQN559 and TQN560)
TQN557 Click to Enlarge Lock Ring Retainer Removal Insert
TQN558 Click to Enlarge Lock Ring Retainer Removal Screw
TQN559 eTQN559.jpg (1440 bytes) Lock Ring Retainer Removal Handle
TQN560 Click to Enlarge Press Fixture for Lock Ring Retainer
TQN565 Click to Enlarge Balance Cam Adjusting Tool (M3 only)
TQN566 Click to Enlarge Spring Rate Adjusting Tool (M3 only)
-

-

Awl (Optional) (Not Shown)

Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com