Soldering Iron Tester
ST2200

Precise Thermocouple Sensors Simulate Actual Solder
Joints - Verifies Soldering Iron Integrity

ST2200 Soldering Iron Tester gives you a choice of interchangeable sensors designed for utmost accuracy. Includes WST-02B Sensor, Type K Wire Probe, User Manual and Sensor Cleaning Brush.
Specific model numbers:
ST2200F - 110 - 50°F to 1300°F, 110V AC; ST2200F - 220 - 50°F to 1300°F, 220V AC
ST2200C - 110 - 10°C to 700°C, 110V AC; ST2200C - 220 - 10°C to 700°C, 220V AC

Features:

• Output to recorder: 1 mV°F, 100 mV/mV, 100 mV/ohm
• Transient voltage spike detector detects transients over 100 mV and 1ms pulse width.
• MIL-SPEC pass/fail warning light for voltage and resistance test. User selectable 5 or 2 ohms
• Function selection switch for fast tests without moving the iron tip
• Wrist strap tester verifies strap integrity
• Auxiliary AC convenience outlet powers iron under test and insures common ground with the tester
• Built-in thermocouple connector for Type K probes. Wire probe included.
• Comprehensive Operators Handbook with calibration instructions and troubleshooting
  guide
• ESD safe construction

Specifications:

• Temperature Range: 50°F to 1300°F (10°C to 700°C)
• Temperature Accuracy Resolution:
  Accuracy: ± 0.1% of reading ± 1 digit
  Resolution: 0.1°F or 1°F
• Tip Ohms Range: 0-99.9 W
• Tip Ohms to Ground Accuracy Resolution:
  Accuracy: 0 - 20 W ± 0.1 W
  ---------------20 - 100 ± 0.5% of reading
  Resolution: 0.01 and 0.1 W
• Tip mV to Ground Range: 0 - 30mV
• Tip mV to Ground Accuracy Resolution:
  Accuracy: 0 - 20mV ± 0.1mV
  Resolution: 0.01mV and 0.1mV

Replacement sensors and kits:

KST2200 Kit: includes ST2200 Soldering Iron Tester, 2 - WST-02B Thermocouple Solder Bead Sensors, TC801P Solder Pot Probe, Carry Case, User Manual and Sensor Cleaning Brush. Specify °F/°C, 110/220VAC.

KST2203 Kit: Same as KST2200 but substitute WST-03 Elevated Wire Sensor.

WST-02 Thermocouple Solder Bead Sensor: Simulates a solder joint. Measures tip temperature of most small (<1/8”) conical, chisel and screwdriver type soldering tips. It provides excellent thermal transfer when the solder is melted by the iron and gives a good representation of effective working tip temperature. Heavy duty sensor. Small to medium tips 0.2gram mass.

WST-02KIT Rebuilding Kit: includes WST-02 Sensor, Screw, & Plugs.

WST-02B Thermocouple Solder Bead Sensor: Measures tip temperature of most small (<1/8”) conical, chisel and screwdriver type soldering tips. (shown on tester) Has a “bonnet” or position stop to guide iron tips for repeatable measurements. Heavy duty sensor. Small to medium tips 0.2gram mass.

WST-02BKIT Rebuilding Kit: includes WST-02B Sensor, Screw, & Plugs.

WST-03 Elevated Wire Sensor: May be used on larger tips. Lets the operator measure temperature at an exact point on the iron tip. For all tip sizes.

WST-03KIT Rebuilding Kit: includes WST-03 Sensor,Screw, & Plugs.

12423-01: Attache style Carrying Case

TC867: Sensor Assembly for direct temperature measurement only, from a Heat Prober Thermocouple Meter.