Black Guard Gages

Black oxide treatment prevents corrosion And shows gage wear… saving money and time. Make quick and accurate measurements with Black Guard Pin Gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations. Use for Go / No-Go gaging. Size in micrometers and Snap gages. These gages are a must for anyone Making frequent and varied measurements.

Black Guard Features

• PREVENTS RUST & CORROSION *
• VISIBLE WEAR INDICATION *
• BRIGHT CLEAR MARKING *
• LONGER GAGE LIFE *

Black Guard black oxide treatment typically penetrates .00004" to .00006" deep, which will visually reveal wear patterns allowing the inspector to calibrate or replace gage pins more effectively. Black Guard treatment will help prevent rust and corrosion which will extend the useful life of the gage.

Class ZZ ( .0002" or .005 mm tolerance). * Go (Plus) or NoGo (Minus) * NIST traceable * .0005", or .02mm sizes * .001" or .02mm set increments * 52100 tool steel; 60/62 Rc * 2" long * 10 microinch finish or better * Within .0001" round * Marked with size & direction of tolerance on gages over .060" * Certificate of Accuracy included * Registered ISO 9002

Class ZZ Pin Gages

Inch & Metric Sets, Libraries and Replacement Pin Gages
Make quick and accurate measurements with Vermont Gage pin gages. Measure hole sizes. Calculate distances between holes. Gage slot widths. Check locations.
Use for Go/No-Go gaging. Size in micrometers and snap gages. These economical gages are a must for anyone making frequent and varied measurements.

• Class ZZ (.0002" or .005mm tol.)
• Go (Plus) or NoGo ( Minus)
• NIST traceable
• .0005", or .01mm sizes
• .001" or .02mm set increments
• 52100 tool steel; 60/62 Rc
• 2" long
• 10 microinch finish or better
• Within .0001" round
• Marked with size & direction of tolerance on gages over .060"
• Certificate of Accuracy included

Class X Plug Gages

Precision Plug Gages stocked in .0001’’ increments from .0040’’ to 1.000’’
Use as masters to calibrate measuring equipment or to gage parts directly.
Either way, these Class X (+.00004",-.0000") steel plug gages are accurate, cost effective measurement standards perfect for both the shop floor and Metrology laboratory. Included with Certificate of Accuracy. Available with Certificate of Calibration or Conformance traceable to NIST.

Custom Plug Gages

Plug Gages in custom diameters from .0040’’ to 6.0100’’
These plug gages are custom made to your diameter specifications in both Inch and Metric. Choose style (Reversible, Taperlock, Trilock, Progressive or Hex), tolerance (Class XX,X,Y,Z,ZZ) and material (Steel, Chrome plated, Carbide). Gages can be assembled with handle and marked with your unique tool number. Single-End and Double-End assemblies include 1 line (up to 15 characters) of custom marking. Certificate of Accuracy is included. Available with Certificate of Calibration or Conformance traceable to NIST.

Custom Ring Gages

Ring Gages in custom diameters from .0150’’ to 12.2600’’
These ring gages are custom made to your diameter specifications in both Inch and Metric. Choose tolerance (Class XX,X,Y,Z,ZZ) and material (Steel, Chrome plated, Carbide). With a Go and NoGo Ring, an inspector can quickly pass/fail parts without taking time consuming readings from an indicator. These Ring gages are also perfect for use as masters for bore gages and internal micrometers. A certificate of Accuracy accompanies every ring gage assuring size. Available with certificate of Calibration or Conformance traceable to NIST.

Custom Master Setting Discs.

Master Setting Discs in Custom Diameters from .1500’’ to 8.0100’’
These master setting discs are custom made to your diameter specifications
in both Inch and Metric. Choose tolerance (Class XX,X,Y,Z,ZZ) and material (Steel, Chrome plated,Carbide). Use Vermont Gage master
setting discs to calibrate your measuring equipment. Designed to
satisfy traceability requirements of your quality control system, these
masters are a must for your calibration lab and inspection areas. Vermont Master Setting discs come complete with Certificate of Accuracy. Available with Certificate of Calibration or Conformance traceable to NIST.

Thread Gages

Working Thread Plugs, Thread Rings and Set Plugs, and Pipe Thread Gages Inspect internal and external threads with Vermont Gage thread gages. Vermont Gage thread gages are made to precise Class X tolerances and come standard with a Certificate of Accuracy. Standard thread plugs include pitch diameters for 2B, 3B (Inch) and 6H (Metric) class of fit.
Standard thread rings and setting plugs include pitch diameters for 2A,
3A (Inch) and 6g (Metric) class of fit. Go/NoGo plug double-end assemblies get 1 line (up to 15 characters) of custom marking. Thread members are available in steel and chrome plated for added wear resistance.