Superior Manufacturing & Hydraulics | Specialty Equipment

CLE135 Make / Break Tool

CLE135 Make / Break Tool
3- 1/2 "

APPLICATION: For use with small directional boring units to make and break drill rod and in shop or on location to make or break connections of downhole tools.

Maximum Torque Higher Ratings on Request	3,000 ft. lbs. 4,000 ft lbs breakout
Maximum Operating Pressure	3,000 P.S.I. / 20.7 Bar
Recommended Flow Rates	5 to 35 GPM / 19 to 132 LPM
Length	28" / 71.1cm
Width	15 3/4" / 40 cm
Height	19 1/2" / 9.5cm
Weight (approximate)	282 lbs. / 128 kg
1 Jaw Size	Dies Available 1.315" thru 3 1/2"

CLE185 Lockjaw Make / Break Tool

CLE185 Lockjaw Make / Break Tool

APPLICATION: The CLINCHER Make/Break Tool is manufactured to provide a means of making up or breaking out high torque tubular connections. This tool's compact design allows tubulars to be handled in a horizontal position in the workshop or a rig's catwalk. The CLINCHER 8-5/8" Make/Break Tool features the CLINCHER LockJaw. The Lockjaw system eliminates the need to manually lock and unlock the tool's jaws. Optional legs allow the tool to be used in the vertical position.

Maximum Torque Higher Ratings on request	50,000 ft. lbs.and 60,000 ft lbs break out
Maximum Operating Pressure	3,000 P.S.I. / 20.7 Bar
Recommended Flow Rate	15 to 35 GSM / 57 to 132 LPM
Handle Length	24 1/2 " / 62.23 cm
Length	52" / 132 cm
Width	38" / 96.5 cm
Height	37" / 94 cm
Weight (approximate)	3000 lbs. / 1364 kg
1 Jaw Size	Dies Available :1.315" thru 8 5/8"

Hydraulic Rotary Table

Hydraulic Rotary Table

APPLICATION: Provides an effective means to add high torque, high speed drilling capability to any snubbing unit. Large bore allows passage of BHA. Integral swivel allows full control of hydraulic slips during rotation without requiring hoses to be connected or disconnected.

Maximum Torque	22,000 ft. lbs / 29,828 Nm
Maximum Operating Pressure	3,000 P.S.I. / 20.7 Bar
Maximum Speed	77 RPM @ 200 GPM / 769 LPM
Minimum ID	11.06 " / 28.1 cm
Maximum OD	35 ¹/^₂" / 90.2cm
Maximu Height	42 - 3/4" / 108.6 cm
Weight (approximate)	4,100 lbs. / 1,863 kg
Tensile Load Capacity	460,000 lbs / 209,090 kg
Snubbing Load Capacity	170,000 lbs / 77,272 kg

updated 05/2010

SPECIALTY EQUIPMENT