 |
 |
|
(6 items)
180 Series Friction Micrometers feature our friction thimble and a convenient lever lock. Forged steel frame has reinforcement ribbings and a black wrinkle finish. Silver mist chrome finish head has black graduations for easy reading to .0001". All 180 Series Micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Friction thimble
- Convenient lever lock
- Reading to .0001"
- Carbide spindle and anvil faces
- Drop forged steel frame with reinforcement ribbing
- Durable black wrinkle finish frame
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- 0-1" and 1"-2" models include plastic case
- Fitted wood case
View Items
|
|
|
|
|
 |
|
(24 items)
Here's a micrometer with the look and feel of quality a craftsman really appreciates. Forged steel frame has a durable black wrinkle finish combined with a silver mist chrome finish head. The 850 Series Micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Lock nut and ratchet stop standard
- Reading to .0001" or .002mm available
- Steel or carbide faces available
- Durable black wrinkle finish frame
- Drop forged steel frame with reinforcement ribbing
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- 0-1" and 1"-2" models include plastic case
- Fitted wood case available
View Items |
|
|
|
|
 |
|
(4 items)
This micrometer has the feel, balance and all the important features desired by experienced craftsmen. Decimal equivalents are permanently stamped on both sides of the frame. Forged frame is designed for easy access into narrow spaces. This quality American made precision measuring instrument meets or exceeds government specification GGG-C-105c for accuracy.
- Lock nut and ratchet stop standard
- Reading to .0001" or .002mm
- Carbide spindle & anvil faces standard
- Decimal equivalents stamped on frame
- Drop forged steel frame designed for easy access into narrow spaces
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish frame and head
- Black lines & numbers for easy ...
View Items
|
|
|
|
|
 |
|
(60 items)
All T Series Micrometers feature our exclusive "Feathertouch" tubular steel frame. Lightweight and well balanced, there's less tendency to force measurements or allow the micrometer's weight to influence readings. Tubular frame design minimizes distortion or expansion due to shock or temperature changes and comes in a black wrinkle finish. All T Series Micrometers meet or exceed government specification GGG-C-105c for accuracy.
- "Feathertouch" tubular steel frame with durable black wrinkle finish
- Lock nut and ratchet stop standard
- Reading to .0001" or .002mm
- Carbide spindle & anvil faces standard
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Black lines & numbers for ...
View Items
|
|
|
|
|
 |
|
Digital Micrometers offer some advantages over conventional micrometers. They almost eliminate errors in gaging and unskilled workers can measure their work accurately. Thimble and sleeve have conventional marking and may be used for measurements or to verify the counter reading.
Forged steel frame
Friction thimble
Lock
English/Metric switchable
Reads to .00005”/.001mm
Floating zero
Automatic ON/OFF
Silver mist chrome plated micrometer head
Carbide spindle and anvil
1.5V Battery
Includes case
View Details
|
|
|
|
|
 |
|
(48 items)
Mandrel Micrometers offer the versatility of covering a large range of measurements with a single tool. Micrometer comes complete with mandrels, checking standards and fitted wood case. "Feathertouch" tubular steel frame has a durable black wrinkle finish. All Mandrel Micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Exclusive "Feathertouch" tubular steel frame
- Reading to .001" or .01mm available
- Hardened steel measuring faces
- Lock nut and ratchet stop standard
- Durable black wrinkle finish frame
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Checking standards with handles
- Includes fitted
View Items
|
|
|
|
|
 |
|
(24 items)
S-T Blade Micrometers feature the "Feathertouch" tubular steel frame. This micrometer has .017" thick anvil and spindle contacts to achieve precision measurements in the narrowest of grooves. The non-rotating spindle and anvil are hardened, ground and lapped. Meets or exceeds government specification GGG-C-105c for accuracy.
- Exclusive "Feathertouch" tubular steel frame
- Reading to .0001" or .002mm available
- Carbide spindle and anvil available
- Non-rotating spindle
- .017" thick blades
- Durable black wrinkle finish frame
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Lock nut
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- 0-1" models include plastic case
- Fitted wood ...
View Items
|
|
|
|
|
 |
|
(24 items)
Large Blade Micrometers feature our "Feathertouch" tubular frame and blades that are .017" thick to measure those hard to reach areas. Includes mandrels and fitted wood case. These micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Exclusive "Feathertouch" tubular steel frame
- Reading to .001" or .01mm
- Carbide spindle and anvil available
- Non-rotating spindle
- .017" thick blades
- Durable black wrinkle finish frame
- Lock nut
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Includes wood case
View Items |
|
|
|
|
 |
|
(4 items)
Hub Micrometers are designed to take measurements of hubs and hard to reach areas where the shallow frame is necessary. Hub micrometers can be used to reach through holes to measure thickness. Solid steel frame with black wrinkle finish. This micrometer is furnished with ratchet stop and lock nut. Meets or exceeds government specification GGG-C-105c for accuracy.
- Shallow frame with durable black wrinkle finish
- Spindle hardened to Rc 62-64 with lead error held to within .00005"
- Lock nut and ratchet stop standard
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Supplied with plastic case
- Fitted wood case available
View Items |
|
|
|
|
 |
|
(6 items)
One-half inch diameter discs on this micrometer are designed to get those hard to reach measurements. Spindle and anvil discs are .015" thick at the edge, tapered to 1/16" at the center, making it ideal for measuring fins, lands, rib, cutting edges and other difficult to gage sections. Accurate measurements to .001" can be taken on paper, rubber, plastics, and other materials with this micrometer. Anvil and spindle faces are lapped flat and parallel over the entire disc surface. Disc micrometers meet or exceed government specification GGG-C-105c for accuracy.
- 1/2" diameter hardened steel spindle and anvil disc lapped flat and parallel over entire surface
- "Feathertouch" tubular steel frame with durable black wrinkle ...
View Items
|
|
|
|
|
 |
|
(4 items)
The thread micrometer is designed for rapid checking of screw threads. While this micrometer does not measure the exact diameter of a V-thread, it does indicate through comparison whether screw threads are being accurately cut or chased. Contacting tapered points are ground and lapped flat to .015". This permits accurate thread comparison without point ride. Meets or exceeds government specification GGG-C-105c for accuracy.
- 60° conical spindle and anvil
- Lock nut and ratchet stop standard
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head
- Durable black wrinkle finish frame
- Black lines & numbers for easy reading
- 0-1" includes plastic case
- Fitted wood case ...
View Items
|
|
|
|
|
 |
|
(10 items)
Screw Thread Micrometer spindle and anvil are designed to permit measurement of screw threads on pitch diameter. Meets or exceeds new J Series Thread Form and United States Standard or revised American Standard GGG-C-105c for accuracy.
- Floating/rotating anvil
- Decimal equivalents stamped on frame
- Checking standards available
- Spindle hardened to Rc 62-64 with lead error held to .00005"
- Silver mist chrome finish head & frame
- Reading to .001"
- Black lines & numbers for easy reading
- Fitted wood case available
- Supplied with plastic case
- Lock nut and ratchet stop
View Items |
|
|
|
|
 |
|
(16 items)
Rolling Mill Micrometers are designed primarily for gaging thickness of sheet metal. Accurate measurements can be taken away from the edges or where a deep throat is required. 3" & 6" throat depth micrometers have "Feathertouch" tubular steel frame. 9" & 12" throat depth micrometers have a solid frame with lightening holes. Meets or exceeds government specification GGG-C-105c for accuracy.
- Exclusive "Feathertouch" tubular steel frame on 3" & 6" models
- 3/16" radius ground anvil
- Spindle hardened to Rc 62-64 with lead error held to within .00005"
- Lock nut and ratchet stop standard
- Silver mist chrome finish head
- Durable black wrinkle finish frame
- Black lines & numbers for easy reading
- Includes fitted wood case
View Items
|
|
|
|
|
 |
|
(6 items)
Tri-Flu Micrometers have a V-anvil designed for diameter measurements of three fluted cutting tools or to determine true roundness of cylindrical work. All tri-flu micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Reading to .001" or .0001"
- Steel or carbide faces
- Spindle hardened to Rc 62-64 with lead error held to within .00005"
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Durable black wrinkle finish frame
- Fitted wood case available
View Items |
|
|
|
|
 |
|
(6 items)
Tubing Micrometers have a half frame with extended anvil to measure the thickness of tubing. Micrometer measures to a minimum of 3/8" inside diameter. Meets or exceeds government specification GGG-C-105c for accuracy.
- Lock nut and ratchet stop standard
- Spindle hardened to Rc 62-64 with lead error held to within .00005"
- Silver mist chrome finish head
- Reading to .001" or .01mm
- Black lines & numbers for easy reading
- Durable black wrinkle finish frame
- 0-1" and 1"-2" models include plastic case
- Fitted wood case available
View Items |
|
|
|
|
 |
|
(12 items)
Hole Locator Micrometers have a special half frame for precision locating, gaging and checking holes, slots and small diameter tubing. Meets or exceeds government specification GGG-C-105c for accuracy.
- Available in 3 pin sizes
- Lock nut and ratchet stop standard
- Durable black wrinkle finish frame
- Spindle hardened to Rc 62-64 with lead error held to within .00005"
- Reading to .001" or .01mm
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Plastic case included
- Fitted wood case available
View Items |
|
|
|
|
 |
|
(4 items)
This micrometer is ideal for fast comparison readings on threads and for measurements of small flutes, recesses, key ways and grooves.
- 15° point on spindle and anvil
- Reading to .001" or .01mm
- "Feathertouch" tubular steel frame with durable black wrinkle finish
- Lock nut and ratchet stop standard
- 0-1" model includes plastic case
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Spindle hardened to Rc 62-64 with lead error held to .00005"
View Items |
|
|
|
|
 |
|
(4 items)
This micrometer, with a .120" diameter on end of spindle and anvil, is made for measuring splines, slots, recesses, and keyways.
- .120" diameter contact on spindle and anvil
- Reading to .001" or .01mm
- "Feathertouch" tubular steel frame with durable black wrinkle finish
- Lock nut and ratchet stop standard
- 0-1" model includes plastic case
- Silver mist chrome finish head
- Black lines & numbers for easy reading
- Spindle hardened to Rc 62-64 with lead error held to .00005"
View Items |
|
|
|
|
  |
|
(24 items)
Depth Micrometer sets with interchangeable rods measure holes, grooves, shoulders, etc., up to 10" in depth. Rods are easily inserted and held by knurled rod cap. Adjusting nuts on end of rod compensates for wear. Ends of rods are hardened, precision ground and lapped. All depth micrometers meet or exceed government specification GGG-C-105c for accuracy.
- Reading to .001" or .01mm
- Spindle hardened to Rc 62-64
- Silver mist chrome head and base
- Lock nut and ratchet stop standard
- Base micro lapped and hardened
- Bases hardened to Rc 62
- Rods available for greater range
- Furnished in fitted mahagony case
View Items |
|
|
|
|
 |
|
These micrometers are a small sampling of the hundreds of special designs that have been developed and manufactured for our customers' unique gaging requirements. We invite requests for quotations on special micrometers.
View Details
|
|
|
|
|
 |
|
(2 items)
Made of high quality heavy duty leather, conveniently worn on your belt, comfortable and protects your micrometer or caliper.
- High quality leather
- Comfortable
- Belt loops
- Protects micrometer/caliper
View Items |
|
|
|
|
