Electronic Digital Readout Indicators "Basic" Series

Standard Features for "Basic" Series:

• 10 Standard resolutions available
  .001"/.02mm .0001"/.002mm .0005"/.01mm .00005"/.001mm .00025"/.005mm
  
• 7 Measuring Ranges-Inch/Metric
  .060"/1.5mm .600"/15.mm .150"/3.8mm 1.0"/25.41mm .250"/6.35mm 2.0"/50.8mm .500"/12.5mm 4.0"/101.6mm
  
• Date Input-Output
  With the selection of the proper output cable, the logic gage has the following outputs:
  RS232- direct interfacing to computers and serial printers
  BCD- CDI's established output system (enhanced)
  MTI- interface directly to MTI data collectors and or printers
  Remote Functions- Hold, Power input, and Clear are also provided at the data I/O connection
  Data Input/Output is automatically determined by the cable used.
  
• 3 Power Sources:
  Replaceable Zinc Air Batteries-
  Environmentally safe (no cadimium. lithium, or mercury
  A/C Adapter- 110v or 220v 50/60 Hz
  External- Through the Data Port (regulated 5 VDC)
  
• Inch / Metric Measuring Systems:
  Logic series offers English or Metric measuring systems. This minimizes measuring conversion errors by using either an Inch or Metric detector system.
  
• Inch / Metric Conversion:
  An English gage can be switched to Metric for Metric readings and vice versa.
  
• Travel Reverse:
  Reverses the direction of the reading (+/-) in relationship to spindle movement.
  
• Maximum Reading Hold:
  Displays and holds the highest reading. Actual spindle position is retained.
  
• Rotating Bezel:
  Allows positioning of the gage display at any angle throughout 270 degrees for convenient viewing
  
• Low Battery Warning:
  The display flashes (short off/long on) as a warning.
  
• Large Direct Drive LCD:
  Character height .305"
  
• Floating Zero:
  Allows the setting of ZERO at any position of the spindle.
  
• AGD Sizes:
  AGD GROUP 2- for measuring ranges .060" to .600"
  AGD GROUP 3- for measuring ranges of .500" and 1.0"
  
• Auto Off:
  Turns gage off after 10 minutes of inactivity If Auto Off is enabled, and hour glass figure will appear on the left side of the display