 |
 |
|
(5 items)
Accuracy in accordance with AGD specifications. All indicators will be accurate within plus or minus 1 dial graduation in the first 2-1/3 revolutions—plus or minus 5 graduations after 2-1/3 revolutions.
- Adjustable bezel and tolerance pointers
- Shock proof mechanism
- Unbreakable crystal
- Center lug back
- Easy to read black markings
View Items |
|
|
|
|
 |
|
New combination English/metric dual reading dial indicator. English readings on outer dial and metric readings on inner dial. Meets AGD Group 2 specifications.
- 1" / 25mm travel
- Reads to .001"/ .01mm
- Center lug back
- English readings-outer dial
- Metric readings-inner dial
- Unbreakable crystal
View Details
|
|
|
|
|
 |
|
(6 items)
Dial Indicators are built to American Gage design specifications for accuracy. The advanced, simplified design of these dial indicators is well known for its accuracy, sensitivity, ease of operation and trouble-free long life.
- 1-11/16" diameter bezel
- Meet all AGD specifications
- Easy reading white dial face with black graduations
- Shock proof
- Unbreakable crystal with adjustable bezel
- Jeweled bearings available
- Supplied with center lug back
View Items |
|
|
|
|
 |
|
(20 items)
- 2-1/4" diameter bezel
- Meet all AGD specifications
- Easy reading black graduations
- Shock proof
- Unbreakable crystal with adjustable bezel
- Supplied with center lug back
View Items |
|
|
|
|
 |
|
(7 items)
- 2-3/4" diameter bezel
- Meet all AGD specifications
- Easy reading white dial face with black graduations
- Shock proof
- Unbreakable crystal with adjustable bezel
- Supplied with center lug back
- Jeweled bearings available on 1.000" range models
- Jeweled bearings standard on 2.000" through 5.000" range models
View Items |
|
|
|
|
 |
|
Standard Features for "Basic" Series:
- 10 Standard resolutions available
.001"/.02mm .0001"/.002mm .0005"/.01mm .00005"/.001mm .00025"/.005mm
- 7 Measuring Ranges-Inch/Metric
.060"/1.5mm .600"/15.mm .150"/3.8mm 1.0"/25.41mm .250"/6.35mm 2.0"/50.8mm .500"/12.5mm 4.0"/101.6mm
- Date Input-Output
With the selection of the proper output cable, the logic gage has the following outputs:
RS232- direct interfacing to computers and serial printers
BCD- CDI's established output system (enhanced)
MTI- interface directly to MTI data collectors and or printers
Remote Functions- Hold, Power input, and Clear are also provided at the data I/O ...
View Items
|
|
|
|
|
|
|
Additional Features Standard on the "Plus" Series
- Absolute/Preset Measuring:
A preset value can be easily entered. The gage display cannot exceed 99.9" or 999mm. If gage is turned off, preset value is retained.
- T.I.R. Measuring:
Gage displays the difference between the highest and lowest values reached.
- Freeze/Display Reading Hold:
Holds the reading after the measurement has been taken. Ideal for use in hard to read areas Actual spindle position is retained.
- Tolerancing:
Allows for the entering of high and low tolerances. When tolerances are exceeded the display will flash and either high or low will be indicated. If the gage is turned oft, tolerance ...
View Items
|
|
|
|
|
 |
|
Designed to quickly gage the thickness of paper, leather, plastic sheets, wire, sheet metal and several other items. Thumb control on top of the gage lifts the spindle. Preloaded spindle assures consistent pressure for accurate measurements of a variety of materials.
- Lightweight and compact
- Continuous dial with revolution counter
- Ground and lapped contacts
- Large, easy to read dial
- Full 1/2" range
- Reading to .001"
- Black lines and numbers
View Details
|
|
|
|
|
 |
|
(2 items)
Easy to read dial and large base with thumb lock to hold measurements.
- AGD Group 2 dial indicator
- 3" x 1/2" base
- Adjustable bezel for zero setting
- Tolerance pointers
- Continuous reading with revolution counter
- Supplied in plastic case
View Items |
|
|
|
|
 |
|
Handy, easy to read dial depth gage for fast and accurate measurement.
- 2-1/2" x 1/2" base
- Continuous dial with revolution counter
- Includes extra 1" & 2" extensions
- With case
View Details
|
|
|
|
|
 |
|
Quick and accurate measurements with this easy to ready large dial face. Knife edge and pointed anvil for those narrow slots or recesses.
- 2-1/2" x 1/2" base with knife edge
- Needle point anvil
- With case
View Details
|
|
|
|
|
 |
|
Lifting Lever allows the rack to be lifted permitting the work to be placed or removed from under contact point. Mounted for left- hand operation.
- For Group 1, 2 and 3 dial indicators
- Left-hand operation
View Details
|
|
|
|
|
 |
|
(3 items)
Tolerance Hands can be applied for checking parts to determine if measurement is above, below or within desired tolerance range.
- For Group 1, 2 or 3 indicators
View Items |
|
|
|
|
 |
|
Spindle Gaiter assures accurate readings in a contaminated atmosphere and prevents damage to delicate parts.
- Protects from dust and chemical vapors
- For Group 1, 2 and 3 indicators
View Details
|
|
|
|
|
 |
|
(14 items)
Dial Indicator Backs fit all group 1, 2 and 3 indicators. All backs have four holes that allow mounting in vertical or horizontal position.
- Ideal for special fixturing and gaging
- Interchangeable with Electronic Digital Indicators.
View Items |
|
|
|
|
 |
|
(9 items)
Dial Indicator Contacts are available in many shapes and sizes to meet your needs.
- Hardened steel
- Polished contact area
- AGD 4-48 threads
View Items |
|
|
|
|
 |
|
(3 items)
Hardened steel Domed Contacts have polished flat ends and AGD 4-48 threads.
View Items |
|
|
|
|
 |
|
(5 items)
Hardened steel Flat Contacts have polished flat ends and AGD 4-48 threads.
View Items |
|
|
|
|
 |
|
(9 items)
Hardened steel Extended Flat Contacts have polished flat ends and AGD 4-48 threads.
View Items |
|
|
|
|
 |
|
(4 items)
Tapered Contacts are supplied in four convenient lengths with standard AGD 4-48 thread.
- Hardened steel
- AGD 4-48 threads
- Polished end
View Items |
|
|
|
|
 |
|
(17 items)
Standard Contacts are made from hardened steel with polished tip to prevent scratching. Threads are standard AGD 4-48.
- Hardened steel
- Polished tip with radius end
- AGD 4-48 thread
View Items |
|
|
|
|
 |
|
(2 items)
Internal Hole Attachments can be used for testing or checking internal sufaces not easily reached by regular dial spindles
- Easily check internal surfaces
- For all AGD dial indicators
View Items |
|
|
|
|
 |
|
Right Angle Attachment is used to check conformity or face runout. Transfers motion from axis perpendicular to the rack.
- Checks shoulder or face runout
- For all AGD indicators
View Details
|
|
|
|
|
 |
|
(2 items)
Tool Post Holder adapts indicator to lathe tool post holders, milling machine arbors, height gages, etc.
View Items |
|
|
|
|
 |
|
"G" Clamp attachment has a large 1-1/4" capacity and a 5/16" dia. X 3" clamping rod.
- 5/16" x 3" clamping rod
- 1-1/4" capacity clamping
View Details
|
|
|
|
|
 |
|
(4 items)
Holding Rod is rigid with accurate diameters for snug fit in swivel joints. Popular lengths available to suit your needs.
- Available in four sizes
- Fits all AGD indicators
View Items |
|
|
|
|
 |
|
(5 items)
Universal Clamps can be positioned to any desired angle. They speed up work of accurate gaging because they are easily adjusted and clamp firmly on post holders and uprights
- Available in six popular sizes
- Position on any angle
- Positive clamping
- Fits all AGD indicators
View Items |
|
|
|
|
 |
|
(6 items)
Stock base complete with dial indicator mounting collet. Use any AGD indicator to make your own dial depth gage.
- Hardened and ground contact surface
- 3/4" wide x 5/8" high
- Available in five lengths
- Fits all AGD indicators
View Items |
|
|
|
|
