|
|
SCHERR-TUMICO
optical comparators and video inspection systems are designed to give
you the best value for your investment. There is a unit for any job or
budget. From small, economical machines to large, CNC measuring systems,
you'll find just the right product to fit your needs. ST Industries will
even modify an existing system or build a special one to satisfy your
needs.
|
Precision Measuring Tools
Click on any picture
|
 |
 |
|
(4 items)
Hardened stainless steel 4-way measurement Lock ON/OFF button Lapped measuring faces Zero reset Large LCD readout Includes case and battery
View Items |
|
|
|
|
 |
|
(3 items)
Dial Calipers are one of the most convenient measuring instruments. One-handed use permits outside, inside, depth and step measuring capabilities. Made of stainless steel with sharp graduations on beam and dial face. Covered rack design helps keep foreign matter out of rack. Extra large, easy to read dial face.
- Four-way measurement (outside, inside, depth and step)
- Hardened stainless steel with satin chrome finish
- Covered rack
- Precision ground and lapped measuring surfaces
- Adjustable bezel with lock
- Thumb roll with lock
- Furnished with fitted case
- Reads direct to .001" or with .100" graduations on beam
- Large, easy-to-read dial
View Items |
|
|
|
|
 |
|
(2 items)
Dial Calipers are one of the most convenient measuring instruments. One-handed use permits outside, inside, depth and step measuring capabilities. Made of stainless steel with sharp graduations on beam and dial face. Covered rack design helps keep foreign matter out of rack.
- Four-way measurement (outside, inside, depth and step)
- Hardened stainless steel with satin chrome finish
- Precision ground and lapped measuring surfaces
- Adjustable bezel with lock
- Thumb roll with lock
- Furnished with fitted case
- Reads direct to .001" or .05mm
- Large, easy-to-read dial
View Items |
|
|
|
|
 |
|
New Dial Caliper with dual readings in English and metric. Eliminates the need for two Dial Calipers.
- Outer dial reads to .001"
- Inner dial reads to .02mm
- Hardened stainless steel
- Four way measurements, inside, outside, step & depth
- Covered rack
- Fitted plastic case
- One revolution, .100" per rev.
- Reads to .001" / .02mm
- English & metric grads on beam
- Adjustable bezel
- Thumb roller & lock
- Precision ground & lapped measuring surfaces
View Details
|
|
|
|
|
 |
|
New 6" One-rev. Dial Caliper with carbide faces on measuring jaws and carbide crosshorns for longer life on abrasive materials.
- Hardened stainless steel
- Carbide face on jaws
- Carbide crosshorns
- Four way measurements, outside, inside, depth & step
- Covered rack
- Adjustable bezel
- Thumb roller & lock
- Reads to .001"
- Graduations on beam
- .100" per revolution
- Large easy to read dial
- Fitted plastic case
View Details
|
|
|
|
|
 |
|
Small, compact 4" Dial Caliper, supplied with pouch, can be carried in your pocket, only 6" long.
- 3-way measurements, outside, inside & depth
- One-Revolution
- Hardened stainless steel
- Precision ground & lapped measuring surfaces
- Adjustable bezel
- Lock
- Reads direct to .001"
- Graduated beam
- Fitted pouch
View Details
|
|
|
|
|
 |
|
Fits all Dial/Digital and Vernier Calipers with jaw up to .140" thick. 20 Piece caliper centerline kit
- Exclusive interchangable centerline cones
- Exclusive 4-48 threaded holes in accessory jaws allow use of any AGD Standard Point with 4-48 threads
- Measure places impossible to reach with a regular cliper - undercuts, grooves, webs and shoulders
- Cold rolled steel, case hardened with black oxide plating for long life and corrosion protection
- Permanent alignment pin assures easy alignment
- Set consists of
(2) Jaw attachments
(2) Stem points 3/8" length x .055" diameter
(2) 1/4" diameter disks
(2) 3/8" diameter disks
(2) 1/2" diameter disks
(2) 3/8" diameter 60 centerline cones
(2) 1/2" diameter 60 ...
View Details
|
|
|
|
|
 |
|
(10 items)
Vernier Calipers are graduated on both sides, one side for outside measurement and the other for inside measurement, except on combination English/metric models. Vernier plates are set on both sides for direct reading. Points are placed on the beam and slide on all sizes, except 36" and 48", for setting dividers. All vernier calipers meet or exceed government specification GGG-C-111c for accuracy.
- Vernier scales reading in 1/1000 inch and 1/50mm
- Adjustable jaw with open face design
- Hardened, recessed beam means lasting accuracy
- Adjustable buffer plate for uniform tension of adjustable jaw
- Completely-adjustable verniers
- Fine adjustment nut with anti- backlash feature
- High grade tool steel with silver mist chrome ...
View Items
|
|
|
|
|
|
|
Vernier Caliper has all stainless steel construction with a satin chrome finish. English and Metric reading for outside, inside, and depth measurements.
- Outside, inside and depth measurements
- stainless steel
- Satin chrome finish
- .001" and 1/20mm reading
- Full 6" range
- Furnished in case
View Details
|
|
|
|
|
|
|
|
