Non-contact
trigger probes for your CMM
Optical
trigger probe system using laser light for manual and DCC CMMs
OTP6M
The
OTP6M optical trigger probe utilises a visible laser spot (Class 2)
to provide a non-contact inspection solution for use on CMMs.
The
OTP6M optical trigger probe system gives users of co-ordinate
measuring machines (CMMs) the ability to add a non-contact inspection
capability to their machines. Integration of the system is easy and uses
standard CMM software to control the measurement process.
Part
no.: A-1352-0025
Description: OTP6M supakit
Product specifications
- Mounting:
Autojoint
- Suitable
interface: OPI 6
- Z-axis
Repeatability (2sigma): 2µm
- 1D
Measurement accuracy (Band width): ±25µm
- Stand-off
distance: 36mm
- Inclined
angles: 60
- Operating
Range (Nominal value depending on target reflectivity): ±4mm
- Spot
diameter (full width, half maximum): 50 m x 70 m
- Measuring
frequency: 20kHz
- Probing
speed: 0.5 to 50mm/s
- Wavelength:
680nm visible red
- Average
Power: 0.5mW
- Trigger
Output: SSR/PICS
- Unit
quantity: 1
- Unit
of measure: EA
|
|
|
 |
|
|
OPI
6 interface
The
OPI 6 interface enables straightforward integration of the
system onto a CMM. It can be used alone to control standard
touch trigger probes and the OTP6M probe, or in conjunction
with the appropriate interface, another multi-wired probe.
Part
no.
A-1352-0030
Description
OPI 6 interface kit
Product
specifications
- Power
supply: Universal : 85-264V, 47-66Hz
- Compatibility:
OTP6M, TP2, TP6, TP6A
Compatible with another multiwired Probe when used with optional PL101
cable
- Trigger
signal output: SSR (normally open/normally closed)
Contact ratings : 50V ac/dc, 80mA dc (max) Renishaw PICS
- 1D/3D
mode select: Remote selection of 1D/3D modes via 7 pin DIN type socket
- Probe
status signals: Output of IN RANGE and "error" signals via
7 pin DIN type socket
- Probe
head input: 15 way high density socket
- System
configuration: 4 DIL switches
- Fuse
ratings: 2 amp (T) HBC 20mm fuse
1 spare fuse is supplied within the fuse holder
- Unit
quantity: 1
- Unit
of measure: EA
|
|
 |
|
