|
Deterco,
Inc. |
||
|
||||||||
|
|
|||||||
|
|
|||||||
 |
|||||||||||
| TP200
standard force system Includes a standard-force module and English documentation TP200 - precision touch trigger probe system with stylus changer, featuring:
|
 |
||||||||||
| High
precision repeatability and 3D form measurement with long styli is achieved
by employing a novel type of strain gauge structure to detect small displacements
of the stylus tip. The strain gauge output is processed and converted into
the Renishaw 2-wire system format using an ASIC electronic chip and hybrid
microcircuit technology.
The stylus module is located on the probe sensor body by a highly repeatable, magnetically retained kinematic coupling. This allows rapid manual or automatic stylus changing without the need to requalify the stylus tips. The module incorporates overtravel protection and a feature on the coupling to ensure correct orientation. Alignment marks are provided to visually aid manual stylus changing. The stylus modules are available in a choice of two overtravel force options. The standard force module is suitable for the majority of applications with styli up to 100mm long. The low force module is intended for use with small diameter stylus balls or in applications where minimum force is essential. The TP200 probe system comprises the probe sensor, with detachable stylus module, the PI 200 interface and the optional SCR200 stylus changing rack. |
|||||||||||
|
|||||||||||
