Standard accessories include:

Universal Charger (100 - 240 VAC)
USB Cable
Software - PTT Interface Program
Software - PTT Bootloader
Software - Mountz Statics Calculator
Protective Cover

System Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
System Accuracy +/- 1% of reading from 10% to 20% of full scale.

Operates with Torque & Force sensors.

Recommended for all hand screwdrivers, wrenches or power tools.

Provides “EZ-Plug & Play” with Mountz Transducers. Features “ARCII” technology, an instant auto-recognition system of the transducer connected to the PTT.

Selection of six operating modes: (Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test).

Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm).

Two units of force measurements: (lbf and kN)

Features built-in Tool Tests operation.

Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader - for updating the PTT operating systems.
Mountz Statistics Calculator - for SPC, CP & CPK calculations.

“Flash" memory allows upgrades to be done by the user in the field & internet through the USB port.

Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).

Six-digit display. and easy to use menu structure.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for up to 50 non-smart torque sensors.

The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools.

Torque and Angle readings are displayed simultaneously and supports up to 8000 RPM.

Stores a total of 2500 data points.

Real time graph of torque vs. time using associated PC Windows software.

Features a Buzzer and Go / No Go LEDs that illuminate when high or low setting is achieved.

Display Accuracy is better than +/- 0.0625 of reading.

Note!
Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the PTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.
.