Deterco, Inc.
Quality Products & Services
For Your Measurement Needs




Contact Us for additional information

New Product for 2004
µDimensionair

µDimensionair. The universal, pneumatic Hand-held Measuring System
 No other air gaging system offers so much - in the palm of your hand - mounted to the workbench or even right to the machine tool.

IP-54 rating means it’s meant to be used on the shop floor - and the air tooling cleans the part from dirt for high performance measurements - fast and easy! No more looking over your shoulder to see the air gage readout - it's right in front of you - simple and clear. The fixed resolution and balanced air system makes the gage a stable and reliable system for your manufacturing environment - single mastering means fast set up.

µDimensionair. Technical Data

Measuring Range Digital Resolution Tooling I.D. Number
± 0.080mm/± 0.003in
0.0005mm/0.00002in
60
± 0.040mm/± 0.0016in
0.0005mm/0.00002in
50
± 0.020mm/± 0.00076in
0.0005mm/0.00002in
20

Operating Temperature 5-35° C/41-95° F
Storage Temperature 0-60° C/32-140° F
Repeatability ± 1 digit
Calibration Accuracy ± 1 digit
Linear Error ± 1 digit
Response Time Approximately 1 second
Thermal Stability 0.1% of full scale/F
Data Output ASCII/Digimatic
Tolerance Indicators Two — over/under
Weight 25kg/5lbs.
Dimensions Main body — approximately 100 x 60 x 70mm/4 x 2.5 x 3 in
Auto Power Off 15 minutes of nan-use
Power Requirements 3 volt lithium battery coin cell, 2 per unit — CR-2450
Battery Life 9 months normal usage — 3000 hours
Air Supply 2 bar ±5%/32psi ±5%
Display Rotates through 270 degrees

Features:

• Affordable • Versatile • Innovative • Rugged

No other air gaging system offers so much — in the palm of your hand — mounted to the workbench or even right to the machine tool. µDimensionair is rated IP-54, so, it can be used on the shop floor — and, the air tooling cleans dirt from the part for high performance measurements — fast and easy!

• Air gage readout is right in front of you — simple and clear.
• Fixed resolution and balanced air system makes the gage stable
and reliable for your manufacturing environment.
• Single mastering for fast setup.

All other features of the µMaxµm Digital Indicator:

• Inch/metric units
• Digital and analog display
• Bi- and uni-lateral tolerances with presets
• Absolute transducer for eliminating travel errors
• Calibratable — battery retains settings
• Multiple data output formats
• Auto-zeroing
• Normal-reverse settings for ID/OD measurements

The µDimensionair is the ultimate of portability and versatility
In your hand or at the workbench or machine tool.

The ultimate in configuration — interchangeable handle allows for pistol grip or normal end-mount for easy application of the plug to the part. For large, heavy plugs, mount the handle between the tooling and the display — assures a well-balanced, ergonomic measuring system. Can also be mounted to a bench stand when parts are brought to the gage.

All parts of the µDimensionair are completely interchangeable and included with the gaging system — versatility is built-in. µDimensionair dial rotates through 270 degrees for easy viewing

All µDimensionair gages are supplied with output capability.

µDimensionair dial rotates through 270 degrees for easy viewing right at the measuring point, where you need it.

Ordering Information Order Number
µDimensionair, complete with handle, adaptor and hose 2095389
Pressure Regulator with filter 2238020
Pressure Meter 2095924
Bench Kit with adaptor 2239307
Output cable — Digimatic 2001025
Serial output cable to DB-9 pin SCB-4
Battery 3V type CR-2450 EBY-1018
Insulated Handle 2237666
Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com