Mahr Federal Millimar Length Measuring Metrology Products

Millimar- Accessories

External clearing contacts

Clearing contacts clear the extreme-value memories of the Millitron 1254 IC and 1250 IC instruments for the instantaneous measured value, so that new extreme values can be accepted.

Bestell-Nr.

1254 IC/1 5312541

Push button, cable 0.5 m (19.69 in)

1254 IC/1F 5312542

Foot-operated switch, cable 2 m (78.74 in)

Order-No.

1254 IC/2 external measuring time contact 5312543

Push button, connecting cable 0.5 m (19.69 in)

1280 Amphenol plug Order No. 3001730

24-channel plug, for feeding limit switch contact signals or BCD signals

Chart paper 5312921

Paper roll 50 m (54.68 ft) for Milligraph 1292 IC and 1293 IC, metal foil paper, width 50 mm (1.97 in), 1 packing unit = 10 rolls

1292 IC/2 5312922

Connecting cable Millitron/Milligraph, cable length 1 m (39.37 in)

Digital nominal value setter

Used on Millitron compact measuring instruments fitted with two probe sockets, in combination with inductive probes 1300*, 1301, 1303, 1334 A, and P2XXX M. The nominal value setter permits the measured value indication of the Millitron to be shifted< from 0 µm to 999 µm (0 in to .03933 in) in steps of 1 µm (39.37 µin). In small measuring ranges with correspondingly high magnifications, measurements can be carried out over a range of 1,000 µm (.03937 in).

Order-No.

1283 5312830

Single measurement, connecting cable 0.5 m (19.69 in), nominal value setting:
decade switch

1283 WN 5312833

Standard for calibrating Millitron indicating instruments. Defined
output signals in µm (µin) 0, ± 3 ( ± 118.1) , ± 10 (± 393.7), ± 30 (± .00118 in), ± 100 (± .00394 in), ± 300 (± .01181 in), ± 1,000 (± .0394 in)
With calibration certificate

1284 5312840

Sum and differential measurement, nominal value setting with decade switch,
1 socket (for 2nd probe), connecting cable 0.5 m (19.69 in)

External zero adjuster

Used on Millitron compact measuring instruments fitted with two probe sockets.
Single measurements in combination with an inductive probe.

Order-No.

1282 5312820

Zero setting range ± 200 µm (0.00787 in), connecting cable 0.5m (19.69 in)

Measuring point selectors

Used for Millitron compact measuring instruments in combination with inductive probes. These units allow several measuring points to be switched successively to one Millitron. Each measuring point has its own allocated zero adjuster.

Order-No.

1285/4* 5312855

Single measurement, 4 sockets (each for 1 probe),

connecting cable 0.5 m (19.69 in), dimensions 185 mm x 110 mm x 60 mm
(7.28 in x 4.33 in x 2.36 in)

1285/8* 5312859

Single measurement, 8 sockets (each for 1 probe), connecting
cable 0.5 m (19.69 in), dimensions 185 mm x 110 mm x 60 mm
(7.28 in x 4.33 in x 2.36 in)

* For a larger number of measuring points, a second unit can be connected to each
free probe socket of the measuring point selector.

Accessories for Millitron 1240

Order-No.

1240/1F 5312431

Foot-operated switch for starting measurements or other
functions, such as zero setting, master value acquisition, printing.
Connecting cable 2 m (78.74 in)

1240/SG 5312439

Control unit with 3 push buttons for releasing different functions, such as start, zero setting, master value acquisition, printing, etc. as well as 5 relay outputs for “GO”, “NO GO”, “Rework”, “batch size reached” and “measuring time”.
Connecting cable 1.5m (59.1 in)

1240/KG 5312438

Classifying instrument with 20 optocoupler outputs to indicate the class

1240/3D 5312430

Push buttons to release 3 different functions, such as start, zero setting, master value acquisition, printing, etc.,
connecting cable 1.5 m (59.1 in)

Statistikdrucker MSP 2 4102040

Thermal printer for documentation and statistical evaluation of measured results.
Interface RS 232C
Paper width 58 mm (2.285 in)

Foot-operated switch for MSP 2 4102058

Paper rolls (5 pcs.) for MSP 2 4102075

Connecting cable 7024634

Connecting Millitron to a PC
For “RS 232” interfaces
9-channel sub-D socket to 9-channel sub-D socket
cable length: 3 m (9.84 ft)

Interface adapter 3016041

RS 232/Centronics

	Prepaid wire transfer required for all international orders
[Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing] All Copyrights reserved by Deterco, Inc. 2003-2010 Tel: (713) 943-2721 e-mail: sales@deterco.com

		Bestell-Nr.
	1254 IC/1	5312541
	Push button, cable 0.5 m (19.69 in)

	1254 IC/1F	5312542
	Foot-operated switch, cable 2 m (78.74 in)

		Order-No.
	1254 IC/2 external measuring time contact	5312543
	Push button, connecting cable 0.5 m (19.69 in)


	1280 Amphenol plug Order No.	3001730
	24-channel plug, for feeding limit switch contact signals or BCD signals


	Chart paper	5312921
	Paper roll 50 m (54.68 ft) for Milligraph 1292 IC and 1293 IC, metal foil paper, width 50 mm (1.97 in), 1 packing unit = 10 rolls

	1292 IC/2	5312922
	Connecting cable Millitron/Milligraph, cable length 1 m (39.37 in)

		Order-No.
	1283	5312830
	Single measurement, connecting cable 0.5 m (19.69 in), nominal value setting: decade switch

	1283 WN	5312833
	Standard for calibrating Millitron indicating instruments. Defined output signals in µm (µin) 0, ± 3 ( ± 118.1) , ± 10 (± 393.7), ± 30 (± .00118 in), ± 100 (± .00394 in), ± 300 (± .01181 in), ± 1,000 (± .0394 in) With calibration certificate

	1284	5312840
	Sum and differential measurement, nominal value setting with decade switch, 1 socket (for 2nd probe), connecting cable 0.5 m (19.69 in)


	External zero adjuster Used on Millitron compact measuring instruments fitted with two probe sockets. Single measurements in combination with an inductive probe.

		Order-No.
	1282	5312820
	Zero setting range ± 200 µm (0.00787 in), connecting cable 0.5m (19.69 in)


	Measuring point selectors Used for Millitron compact measuring instruments in combination with inductive probes. These units allow several measuring points to be switched successively to one Millitron. Each measuring point has its own allocated zero adjuster.

		Order-No.
	1285/4*	5312855
	Single measurement, 4 sockets (each for 1 probe),
	connecting cable 0.5 m (19.69 in), dimensions 185 mm x 110 mm x 60 mm (7.28 in x 4.33 in x 2.36 in)

	1285/8*	5312859
	Single measurement, 8 sockets (each for 1 probe), connecting cable 0.5 m (19.69 in), dimensions 185 mm x 110 mm x 60 mm (7.28 in x 4.33 in x 2.36 in)

	* For a larger number of measuring points, a second unit can be connected to each free probe socket of the measuring point selector.

		Order-No.
	1240/1F	5312431
	Foot-operated switch for starting measurements or other functions, such as zero setting, master value acquisition, printing. Connecting cable 2 m (78.74 in)

	1240/SG	5312439
	Control unit with 3 push buttons for releasing different functions, such as start, zero setting, master value acquisition, printing, etc. as well as 5 relay outputs for “GO”, “NO GO”, “Rework”, “batch size reached” and “measuring time”. Connecting cable 1.5m (59.1 in)

	1240/KG	5312438
	Classifying instrument with 20 optocoupler outputs to indicate the class

	1240/3D	5312430
	Push buttons to release 3 different functions, such as start, zero setting, master value acquisition, printing, etc., connecting cable 1.5 m (59.1 in)

	Statistikdrucker MSP 2	4102040
	Thermal printer for documentation and statistical evaluation of measured results. Interface RS 232C Paper width 58 mm (2.285 in)
	Foot-operated switch for MSP 2	4102058
	Paper rolls (5 pcs.) for MSP 2	4102075

	Connecting cable	7024634
	Connecting Millitron to a PC For “RS 232” interfaces 9-channel sub-D socket to 9-channel sub-D socket cable length: 3 m (9.84 ft)
	Interface adapter	3016041
	RS 232/Centronics