Deterco, Inc.
Quality Products & Services
For Your Measurement Needs



Contact Us for additional information
Selecting Model Numbers
 
for Standard Maxµm, Maxµm Plus & Indicating Units for Remote Transducers
 


Inch
 
   
  Total range of spindle travel: .120in/3.05mm (all models except ±.100in version which has .250in/6.4mm); for restricted pre-travel contact Mahr Federal Technical Assistance.
Gaging force: 3 oz./85 g nominal at center of spindle travel. (Other gaging forces available — call Technical Assistance)
Power requirements: Single 3.4V lithium battery. Order No. EBY-1011 (Requires End Caps, ECS-1196).
   
  Inch    
       
 
  for ±.010in Range for ±.020in Range for ±.040in and ±.100in Range
 
   
  Selecting Model Numbers for Standard Maxµm, Maxµm Plus & Indicating Units for Remote Transducers
   
  Metric
   
 
  4 All units use standard Flat Back except Integral Lug Back units. Integral Lug Back units are standard with Digital Output and available on 6 o’clock stem models only. For Integral Vertical Lug Back, add suffix “A” to the end of the Model Number. For Horizontal Lug Back, add suffix “B” to the end of the Model Number.

Example 1: Model DEI-11111-E1A is a Maxµm Plus with a .375in stem at the 6 o’clock position; ±.010in range; measurement direction clockwise with minus sign showing when the spindle is extended; stem length 17mm/.670in; equipped with Digital Output; and an Integral Vertical Lug Back.

Example 2: Model DEI-71110-D is a Maxµm Remote Indicating Unit with a connector at the 6 o’clock position; ±.010in range; measurement direction clockwise with minus sign showing when the spindle is extended; and is equipped with Digital Output.
     
  Metric  
     
 
  for ±.199mm Range for ±1.00 and ±1.99mm Range
     
     
     
     

Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com