Single Vector Wet Horizontal

FEATURES:

• 240VAC/ 480VAC 60Hz 3Phase Input
• Solid State Demag Switching - No Reversing Contactors (when RDC equipped)
  
• Solid State Head / Coil Switching - No Contactors!
  
• 100" Part Length
• 16" Coil For Machines Up To 6,000 Amps
• Adjustable Operator Control Panel
• Master Power Switch Located on Operator Control Panel
• Ventilator & White Light Switch Located On Operator Control Panel
• Automag Sequencing Control with Guarded Foot Switch
• Heavy Duty Pneumatic Headstock with Guarded Foot Switch
• Shot Selector Switch, Supervisor Settable - Single or Dual Mag Shots
• Equipped With Power Line Safety Contactor
• Fully Variable - Closed Loop Current Control with Controlled Break Feature
• Maximum Current Limitation
• All Sequencing Controlled by Single Electronic Logic Unit
• Digital Ammeter with Reading Hold Function, 1% Accuracy
• Cabinet Construction is 3/16" and Heavier Material for H/D Service
• Bed Rail Supports Added At Every Pillar to Support Extra Weight
  Oversized Bed Rails Designed For Heavy Loads
• Floor Mounting Pads Built Onto All Feet
  
• Machine Designed to Support 8000 Pound Loads (Non-Impact)
  
• Heavy Duty Coil Carriage with Sealed Wheels
  
• Heavy Duty All Copper Busswork
  
• 14 Gauge Stainless Steel Tank Construction.
  
• Extra Heavy Duty Steel Cabinet Pillars Transfer Part Weight to Floor
  
• Heavy Duty Gasketed Rear Access Panels with Draw Latches
  
• Heavy Duty - Hinged & Gasketed Front Doors with Twist Latches
  
• Heavy Duty Crank Driven Tailstock
  
• Extra Heavy-Duty 1" x 4" Solid Steel Bed Rails
  
• Hard Maple Grates Front and Rear - 100" Machine
  
• Pneumatic Filter, Regulator, Moisture Separator & Lockout Valve Included
• Paint Color - Magwerks Tan Baked Powder Coating

OPTIONS:

• 208VAC 60 Hz, 380VAC 50Hz, 415VAC 50Hz. 575 60Hz - PSF-546
• Reversing DC Demag PSF-546
• 6,000 AC Mag & Demag Section
• 8" Coil for Machines up to 6000 Amps
• 14" Coil for Machines up to 6,000 Amps
• 16" Coil for Machines up to 6,000 Amps
• 18" Coil for Machines up to 6,000 Amps
• 20" Coil for Machines up to 6,000 Amps
• 26" Coil for Machines up to 6,000 Amps
• 28" Coil for Machines up to 10,000 Amps
• Autobath Applicator - 18" Stroke60" Stroke Autobath Applicator, Halo Design
• 100watt Blacklight & Mounting Arms with Machine Purchase
• Magwerks UB400SA - 400watt Blacklight with Machine Purchase
• Poly Grates for Use with Water - 100" Machines
  
• Stainless Steel Pump - Upgrade
  
• Automatic Central Conductor Fixture
  
• Solid-State Split Cont. Channel with Extending Busswork for Accessories
  
• Split Push Bars with Dual Current Controls, Long Cabinet
  
• Mag Current Range Expander - Fine Current Control
• Heat Exchanger - Closed Loop Design
  
• 3-Position Pneumatically Driven Headstock for Automatic Release of Parts
  
• 8" x 10" Oversize Head & Tailstock Contact Plates & Work Shelves
• 12" x 12" Oversize Head & Tailstock Contact Plates & Work Shelves
• Single-Vector Powered Rotating Head & Tailstocks (Without Part Fixturing)
• S/V Headstock Riser - 4"
• S/V Tailstock Riser - 4"
• 18" Tall Light Curtain For Machine Guarding
• 200 Amp Fused Master Disconnect with Fuses
• XHD Rear Tank Cutout & Insert For Future Conveyor Installation
• Separate Cabinet for Containing Power Supply, Controls & C/B Disconnect
• XHD Extension Cabinet to Increase Part Capacity from 100" to 168"
• Swing Away Hood, Ventilator and White Light - 100" Machines
  
• MicroTouch Parts Menu System
  
• IS- Basic Integrated System Interface
• IS- Local Printing Interface (At Machine)
• IS- Epson LQ-570+ Report Printer and Cables for Printing From the Machine
• IS- LAN Hardware Interface - for Connecting To Your LAN
• IS- Remote Machine Management Software
• IS- Remote Data Acquisition Software
• IS- Dual Electric Eyes for Automatic Counting Good / Reject Parts