Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 


Torque Testers

 

Series TMG 
Digital Torque Watch / Gauge

 

TMG Digital Torque Gauge

 

 
  • Programmable high/low setpoints with color-coded indicators for quick go/no go testing
  • 256 Data memory for recall and computer download
  • lb-in, kg-cm, and N-cm units are push button selectable
  • RS-232C, Digimatic and Analog outputs
  • Runs on internal NiCad batteries or AC adapter
  • Ergonomic, heavy duty metal construction
  • Both clockwise and counterclockwise operation
  • Overload capacity 200% of F.S.
  • Real time and peak mode (selectable)
  • Tare function
  • Overload alarm, low battery indicator
  • 6.5mm Jacobs Chuck (4mm for TMG-4), (optional 13mm Jacobs Chuck available)
Digital Torque Gauge applicationImada TMG digital torque gage offers programmable high/low setpoints for go/no go testing. ORANGE lights up for torque measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.
Store up to 256 values in memory, which can be displayed or transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lb-in, kg-cm, or N-cm.
TMG torque watches / gauges are sold in kits which include the gauge, six foot cable, and AC adapter/charger. Built-in NiCad rechargeable batteries.
TMG Digital Torque Gauge Ranges 
(Resolution) Accuracy: ±0.4% F.S.

Model

 Capacity (Resolution)
lb-in kg-cm N-cm
TMG-4 69.4 oz-in (0.1 oz-in) 5.000 kg-cm (0.001 kg-cm) 49.03 N-cm (0.01 N-cm)
TMG-15 17.36 lb-in (0.01 lb-in) 20.00 kg-cm (0.01 kg-cm) 196.0 N-cm (0.1 N-cm)
TMG-40 43.40 lb-in (0.01 lb-in) 50.00 kg-cm (0.01 kg-cm) 490.0 N-cm (0.1 N-cm)
TMG-85 86.8 lb-in (0.1 lb-in) 100.0 kg-cm (0.1 kg-cm) 980 N-cm (1 N-cm)

DS-4
Light Weight Digital Torque Tester / Screwdriver with stepless one way clutch

 

 
  • Ergonomic and light weight, yet ruggedly constructed 
  • Available in: lb-in, oz-in, kg-cm and N-cm (specify units when ordering)
  • First Peak, Peak and Real Time measuring mode (selectable)
  • 400 data memory for recall or for SPC download
  • Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing 
  • Programmable screw tightening counter minimizes assembly errors by identifying units with defective screws
  • Programmable Auto Zero function resets unit to zero for easy operation
  • Both clockwise and counterclockwise operation
  • RS-232 output for SPC capability 
  • Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 min. of non-use
  • AC charger and stepless one-way clutch adapter included (1/4” female hex)
  • Optional carrying case available
 

The DS-4 Light Weight Digital Torque Tester / Screwdriver features an integral/adjustable LCD display for more convenient torque readings. The unit is designed for screw tightening torque verification and measures in Real Time, First Peak and Peak measuring modes (selectable).
The DS-4 has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Use the 400 internal memory for data recall or RS-232 download for SPC. 
The DS-4 torque tester substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.
Model DS-4 is sold in kits which includes the torque tester / screwdriver, stepless one-way clutch adapter, Phillips tip and AC adapter/charger. Optional carrying case available.

Digital Torque Tester Ranges 
Accuracy ± 0.5% F.S., ±1 LSD

Model

 Capacity
DS-4 0.30 – 35.00 lb-in 
(Factory standard)
DS-4oz 3.0 – 560.0 oz-in
DS-4kg 0.30 – 40.00 kg-cm
DS-4N 3.0 – 400.0 N-cm

 

 

 

 DS-4 Digital Torque Tester / Screwdriver data acquisition

DTB Cap Torque Tester
 
DTB Cap Torque Tester

 

  • Programmable high/low setpoints with color-coded indicators for quick go/no go testing
  • 256 Data memory for recall and computer download 
  • Clamps containers from 3/4"~ 8" in diameter
  • lb-in, kg-cm, and N-cm units are push button selectable
  • RS-232C, Digimatic and Analog outputs
  • Both clockwise and counterclockwise operation
  • Overload capacity 200% of F.S.
  • Real time and peak mode (selectable)
  • Tare function
  • Overload alarm, low battery indicator
  • AC adapter/ charger and carrying case
Imada’s cap torque tester offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for torque measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint. 
Store up to 256 values in memory, which can be displayed or transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lb-in, kg-cm, or N-cm.
DTB cap torque testers include AC adapter/charger and built-in NiCad rechargeable batteries.
 
DTB Cap Torque Tester Ranges (Resolution) Accuracy: ±0.4% F.S.

Model

 Capacity (Resolution)
lb-in kg-cm N-cm
DTB-4 69.4 oz-in (0.1 oz-in) 5.000 kg-cm (0.001 kg-cm) 49.03 N-cm (0.01 N-cm)
DTB-15 17.36 in-lb (.01lb-in) 20.00 kg-cm (0.01 kg-cm) 196.0 N-cm (0.1 N-cm)
DTB-40 43.40 in-lb (.01lb-in) 50.00 kg-cm (0.01 kg-cm) 490.0 N-cm (0.1 N-cm)
DTB-85 86.8 in-lb (0.1lb-in) 100 kg-cm (0.1 kg-cm) 980 N-cm (1 N-cm)

 

DI-5-RL 
Light Weight Digital 
Torque Tester / Screwdriver 
with stepless one way clutch
DI-5-RL Digital Torque Tester / Screwdriver

DI-5-RL kit

 

 

 

  • Ergonomic, light weight, rugged metal construction
  • lb-in, Kg-cm and N-cm (selectable)
  • First peak, Peak and Real Time measuring mode (selectable)
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • 400 data memory for recall or for SPC download
  • Programmable setpoint with audible beep for uniform tightening or Go/No Go testing. Setpoint sensing range is selectable among ±3%, ±5% and ±10% of setpoint.
  • Zero reset button on the driver for easy operation
  • Both clockwise and counterclockwise operation
  • RS-232 output for SPC capability
  • Runs on internal NiCad batteries (8 hour use)
  • Sold as kits including carrying case, Phillips tips and AC adapter/charger
 
The Imada Digital Torque Tester / Screwdriver is ergonomically designed, extremely lightweight and good for use as a production tool. It tightens or loosens screws up to 90 lb-in., yet can be used in difficult to reach places. Torque controlled screwdrivers can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be performed.
This torque tester has an accuracy of ±0.5%, ± 1 LSD. It offers a programmable setpoint for uniform tightening or Go/No Go testing and also provides data for SPC (statistical process control) via the RS232 port. 
DI-5-RL torque tester substantially reduces scrap and rework costs by eliminating over and under-tightening. It is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies. Sold in kit form including display unit, screwdriver with cable, stepless one way clutch, AC adapter/charger and carrying case.
 

 
DI-5-RL Ranges  Accuracy: ±0.5% F.S.

Model

 Capacity
lb-in kg-cm N-cm
DI-5-RL2 0.15~18.00 0.15~20.00 1.5~200.0
DI-5-RL10 1.5~90.00 1.5~100.0 15~1000
 

 

 

Series i 
Torque Tester 
for Power Drivers & Wrenches

 
Series-i Digital Torque Tester

 
  • Wide measuring range up to 70 lb-in
  • lb-in, Kg-cm and N-cm (selectable)
  • First Peak, Peak and Real Time measuring modes (selectable)
  • Measure both clockwise and counterclockwise
  • RS-232 output for SPC data acquisition
  • Programmable automatic display reset
  • Heavy-duty metal construction
  • Runs on internal NiCad batteries or AC adapter
  • 2 - Smart driver adapters included
  • 3/8" drive for socket wrenches
 

The Imada digital torque tester is ideal for calibrating power screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter.
Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.
 

 

 

Series-i Digital Torque Tester data acquisition
 
Series i Torque Tester Ranges  Accuracy: ±0.5% F.S., ±1 LSD

Model

 Capacity (Resolution)
lb-in kg-cm N-cm
i-8 0.030~7.000 lb-in (0.001 lb-in) 0.03~8.000 kg-cm (0.001 kg-cm) 0.03~80.00 N-cm (0.01 N-cm)
i-80 0.30~70.00 lb-in (0.01 lb-in) 0.30~80.00 kg-cm (0.01 kg-cm) 0.3~800.0 N-cm (0.1 N-cm)
CD-130 1.5~130.0 lb-in (0.1 lb-in) 1.5~150.0 kg-cm (0.1 kg-cm) 15~1500 N-cm (1 N-cm)
 
Specifications – Standard Smart Driver Adapters (2 included)
i-8 i-80 CD-130
Adapter Smart Adapters Spring Adapters
Model  OW-025E OW-10E OW-20E OW-60E SJ-50 SJ-100
Range  lb-in 2 9 18 53 8~50 50~130
Mechanical life 10,000 hrs. 8,000 hrs. 5,000 hrs. 5,000 hrs. 2500 times
Screw on top 6-32 6-32 8-32 1/4-20 5/16-18 3/8-16
Plug to socket 3/8" square x 5/32" (20 mm square x 4 mm)
 
 
Optional Metric Smart Driver Adapters
Model number OW-025 OW-10 OW-20 OW-60
Range 25 N-cm 100 N-cm 200 N-cm 600 N-cm
Screw on top M2P0.4 M3P0.5 M4P0.7 M6P1

 

DI-3-1P 
Digital Torque Tester 
with Remote Sensor
 
 

Test bracket sold separately.  
  • Heavy duty metal construction
  • lb-in, Kg-cm, Kg-m, N-cm and N-m (selectable)
  • First peak, Peak and Real Time measuring mode (selectable)
  • Accuracy: ±0.5% F.S. ±1 LSD ( 32° to 100°F)
  • 400 data memory for recall or for SPC download
  • Both clockwise and counterclockwise operation
  • RS-232 output for SPC capability
  • Runs on internal NiCad batteries (8 hour use)
  • AC adapter/charger included
 

Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lb-ft. It has an accuracy of ± .5% F.S., ± 1 LSD and measures torque in first peak, peak and real time modes (selectable).
Standard RS-232 output is available for analysis by Imada data acquisition software SW-1S.

Digital Torque Tester Ranges   Accuracy ± 0.5% F.S., ±1 LSD

Model

 Capacity
DI-3-1P50 3.0~440.0 lb-in 3.0~500.0 kg-cm 30~5000 N-cm
DI-3-1P500 3.0~362.0 lb-ft 0.30~50.00 kg-m 3.0~500.0 N-m

 

 

  		DI-3-1P Digital Torque Tester with Remote Sensor data acquisition

Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com