Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

Gagemaker calibration equipment is widely used throughout the quality inspection industry because of its versatility. At the core of the calibration product line is the MIC TRAC. This electronic measuring device measures parts, presets indicator style gages, calibrates hand-held inspection gages, and inspects ring and plug gages. For gage calibration, the MIC TRAC comes complete with a computer containing calibration software that can print calibration certificates and track gage information. As an option, team the MIC TRAC with the CAL-PAK, an assortment of fixtures that attach to the base unit for holding gages securely during the calibration process.

Customers who have implemented an in-house calibration system with the MIC TRAC not only realize a substantial savings, but achieve greater control over the inspection of their gauging equipment.

Click here to check Gagemaker 2002 Catalog
Contact Us
for additional information
MIC TRAC MT-4000 PRECISION GAGE SETTING SYSTEM
Calibrates a variety of handheld gages and also inspects ring and plug gages with the purchase of additional accessories. Includes base unit, desktop computer with Calibration Control System software, interchangeable carbide setting blocks, CAL-PAK fixtures, Thread Disk for Windows software, 50 in. lb. torque wrench, MT-4000 Calibration Reference Cards, and reusable shipping container.
MT-4000

 

 

 

Download the Brochure
Model No. Description
PGC-12-W2  Precision gage calibration system, Range 0" - 12",  Accuracy +.00002"
PGC-24-W2  Precision gage calibration system, Range 0" - 24",  Accuracy +.00002"
PGC-36-W2  Precision gage calibration system, Range 0" - 36",  Accuracy +.00002"
PGC-48-W2  Precision gage calibration system, Range 0" - 48",  Accuracy +.00002"
CAL-PAK CALIBRATION FIXTURES
Assortment of fixtures that attach to the MIC TRAC MT-3000 or MT-4000 base unit for holding handheld gages such as calipers, indicators, micrometers, and bore gages during inspection. Package includes the following fixtures: TF-IND, TF-DG, TF-SS, TF-CA, TF-TI, TF-SV, TF-MTL, TF-VN, and storage case. CAL-PAK fixtures are also sold individually.
Model No. Description
CAL-PAK  CAL-PAK assorted calibration  fixtures and accessory blocks.  Refer to the individual item  descriptions below.
INDIVIDUAL CAL-PAK FIXTURES
TF-IND
Model No. Description
TF-IND  AGD and ISO indicator  calibration fixture (includes  .375" and 8mm bushing and  TF-2F block)
TF-DG
TF-SS
Model No. Description
TF-DG  Fixture for depth micrometer  calibration
TF-SS  Support block for extended  micrometer depth rods
TF-CA
Model No. Description
TF-CA  Dial, digital, and vernier  caliper calibration fixture  (includes jaw alignment block  and TF-SA support arm)
TF-TI
Model No. Description
TF-TI
 Fixture for test indicator  calibration
TF-SV
Model No. Description
TF-SV
 Fixture for micrometers (6"  and up) and standards  calibration
TF-MLT
Model No. Description
TF-MTL
 OD micrometer (up to 6")  calibration fixture
TF-VN
Model No. Description
TF-VN
 "V" block fixture for bore  gage calibration
ADDITIONAL MIC TRAC FIXTURES
TF-1F
Model No. Description
TF-1F
 Flat face setting blocks  (1.500" outside dimension)
TF-ALG
Model No. Description
TF-ALG
 Fixture for lead gage  calibration
TF-BA
Model No. Description
TF-BA
 Base support block for setting  dial bore gages
TF-BI
Model No. Description
TF-BI
 Base support plate for setting  dial bore gages
TF-LG
Model No. Description
TF-LG
 Fixture for Gagemaker's lead  gage calibration
TF-VB
Model No. Description
TF-VB
 "V" block fixture for  calibrating Gagemaker's pivot  arm gages

LARGE DIAMETER MEASUREMENTS
Large Diameter Graphic For large diameter measurement, Gagemaker's MIC 360 gage was designed for taking in-process measurements of machined and ground diameters. This gage measures internal, external, straight, or tapered diameters of machined parts with accuracies of ±.0002" on diameters under 12", ±.001" on diameters up to 240", and ±.002" on diameters up to 360.

There are two models of the MIC 360 available; a wireless model, which uses an infrared signal to send diameter measurements to the MIC 360's computer, or a wired model, which measures the diameter as well as the runout of a part.
The base unit of both models mounts directly in most conventional tool holders and tracks the precision diameter wheel around the part as it rotates. During each rotation, diameter measurements are sent to the MIC 360's computer, which displays the diameter and/or runout on the digital readout.
<