|
Originally
designed for engine rebore use, these bore gages have since been developed
into a universal, wide range, two point internal measuring system suitable
for many applications.
An improved mechanical system increases its strength and wear resistance.
All contact points are tungsten carbide. Robust, easy to use and suitable
for most environments and applications.
Set the gage with a setting ring or micrometer by rotating the dial face
to zero. During measurement, the gage is inserted into the bore at an
angle and then rocked slowly to enable a reading to be taken. A spring
loaded centralizing foot ensures that the gage remains on center during
measuring operation when the minimum reading gives the bore size.
Features
- Available
in inch and metric, ranging from 1.2".24" /12.5mm.600mm.
- Choice
of .0001", .0005", .002mm or .01mm graduations.
-
Fast, simple checking of bores for size, ovality, taper, etc.
-
Lightweight housing for extra strength and protection.
-
Thermally insulated for extra stability.
-
Tungsten carbide contact points.
-
Specials available for measurement of deep bores.
-
Extensions up to 2 meters available on some models.
|
|
|
Digital
Cylinder Bore Gages
Digital
Cylinder Bore Gages are a new innovation in bore diameter measurement.
One gage covers four different mechanical dial gage options: .00005"/.001mm,
.0005"/.01mm.
The display can be set to function on either inch or metric with switchable
resolution,
depending on the workpiece tolerance. With programmable preset on “min
value”, once
the gage has been set with a single button press after a sweep of the
gage, the component bore size can be read from the display. All size values
can be downloaded to a printer for hard copy record or to an SPC station
for process control.
Features
- Displays
actual bore or comparative results (Min/Max Hold)
- Direct
Inch/metric conversion
- Presettable
to ring gage or setting master
- Resolution
.00005 "/.001mm, .0005 "/.01mm
- Direct
RS-232 output for SPC or printer
- Fast
checking of bores -- size, ovality, taper, etc.
- Lightweight
ABS gage shroud for extra protection
- Tungsten
carbide contact points
- Thermally
insulated for extra stability
- Robust
construction for shop floor use
- 2-point
measuring with 3-point centering.
- Ranges
from 0.5" to 24" (12-600mm)
|
|
|
