Instant Gaging Fixtures
for Multiple Checking of Machined Parts

	Model 1101-G A basic unit for checking: Blind hold depths Concentricities Lengths Diameters Shoulder lengths IDEAL FOR USE WITH OTHER ECONO-CHECK ACCESSORIES.	Model 1101-G includes: 4 3/4" x 5 1/2" Base Plate (Precision Ground Finish) No. 102 1" x 9" Upright Post (Ground and Polished) No. 103 AGD Indicator Support Bracket. Less Dial Indicator.
	Model A-Group A compact multi-purpose unit for checking external dimensions of-- Plain diameters Snap-ring groove diameters O-ring groove diameters NOTE:  THIS UNIT POSITIVELY LOCATES PART FOR RAPID CHECKING.	Model A-Group includes: No. 1101-G-DT Econo-Check No. 106 Parallel Fixture No. 106-A Groove bar No. 107 90° Angle Fixture No.107-A Ground Guide bar No. 109 Indicator point adaptor Selection of contact points Less Dial Indicator
	Model B-Group A single post unit jwith removable platen. For checking-- Counterbore depths Recess depths Shoulder lengths Indispensable for locating internal and external grooves and forms	Model B-Group includes: No. 1101-G Econo-Check No. 108 G Platen No. 108-A Guide Stops--pair No. 109 Contact Point Adaptor We suggest these optional items to be requistioned with the Model B-Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.
	Model 201-P Base Precision Ground Finish for Two-post Unit Can check several dimensions at one checking station. Permits use of several Econo-Check accessories Provides multiple checking stations Indispensable for locating internal and external grooves and forms	Model 201-P Base includes: No. 1101-G Econo-Check No. 108 G Platen No. 108-A Guide Stops--pair No. 109 Contact Point Adaptor We suggest these optional items to be requistioned with the Model B-Group: No. 108-B Spring Retainer Assembly. Selection of Contact Points and Hooks.
	Model 201-G-DT-Base Precision Ground Finish for Two-post Unit Permits use of several Econo-Check accessories Provides multiple checking stations Can check several dimensions at one checking station Groove Locations Groove Diameters	Model 201-G-DT-Base includes: 22 (1/4" - 20 UNC) drilled and tapped holes to accommodate attachment of Econo-Check accessories. This Model can be ordered with a variety of components to assemble a versatile checking unit. (Base plate only.)
	Model 1111 1" x 9" upright post 3" round hardened steel anvil base Fine adjustment feature optional Less Dial Indicator
	Universal Support Bracket (No. 103) The universal bracket provides firm support through attachment to indicator lug.
	Universal Support Bracket (No. 203) fine adjustment feature.
	Universal Support Bracket (No. 113) with 3/8" diameter hole to accomodate stems n AGD indicators and air jets.
	Universal Support Bracket (No. 213) Same as No. 113 with fine adjustment feature.
	Universal Support Bracket (No. 111) The 5/8' sliding rod permits horizontal adjustment and swivel of indicator.
	Universal Support Bracket (No. 313, 316) No. 313 - Lug Back Mounting Indicator Bracket. Suitable for an indicator that has a Lug Back that can be turned to the horizontal position. No. 316 - Lug Back Mounting Indicator Bracket. With fine adjustment. The above brackets are designed to allow vertical and directional adjustment on a 1" diameter post.
	Platen (No. 108-GX) Platen Assembly including Self-contained Indicator Support Bracket No. 108-X. Less Dial Indicator. Illustrated with two 108-A Guide Stops and a 109 Contact Point Adapter.
	Platen (No. 108-G) Platen with 4 1/2" x 4 1/2" ground finish working area. Illustrated with 108-A ground Guide Stops and No. 103 Indicator Support Bracket. Ideal fixture for checking depths, recesses, shoulders, internal and external groove locations. Less Dial Indicator.
	Indicator Support Bracket (No. 108-X) Can be used with No. 108 Platen to facilitate a variety of checking situations. The 3/8" Diameter hole assures perfect alignment of indicator stem