Deterco Band Saw Blades Super Weld MX

SUPER WELD MX™ BI-METAL MATRIX II ZERO RAKE Tough, Matrix II 8% cobalt cutting edge with zero rake teeth for most general purpose sawing. Straight face, zerorake design cuts efficiently and resists tooth strippage on interrupted cuts in pipe, structural and solid material. Narrow widths for contour cutting on vertical band saw machines.
Width x Thickness
Inches	mm	T.P.I.	Set	Style	150' Coil Prod. No.	250' Coil Prod. No.
1/2 .020	12.7 .50	10 14 18 24 14/10 18/14	RAKER RAKER RAKER WAVY * *	CONSTANT CONSTANT CONSTANT CONSTANT BROACH BROACH	23330 23335 23340 23339 23338 23334	23630 23635 23640 23639 23638 23634
5/8 .032	16 .80	10/6 14/10	* *	BROACH BROACH	23372 23374	23672 23674
3/4 .035	19 .90	10 14 6/4 8/5 10/6 12/8 14/10 18/14	RAKER RAKER * * * * * *	CONSTANT CONSTANT BROACH BROACH BROACH BROACH BROACH BROACH	23390 23395 23407 23412 23415 23420 23422 23423	23690 23695 23707 23712 23715 23720 23722 23723
1 .035	27 .90	10 6/4 8/5 10/6 12/8 14/10	RAKER * * * * *	CONSTANT BROACH BROACH BROACH BROACH BROACH	23450 23462 23467 23470 23475 23477	23750 23762 23767 23770 23775 23777
1-1/4 .042	34 1.07	4/3 6/4 8/5 10/6 12/8	* * * * *	BROACH BROACH BROACH BROACH BROACH	23521 23522 23527 23530 23532	23821 23822 23827 23830 23832

MX PLUS™ BI-METAL MATRIX II POSITIVE RAKE New, improved positive rake design with a tough Matrix II 8% cobalt cutting edge noted for its hardness (65-67 RC) and tough, shock resistant quality is designed for all-around cutting. The positive tooth face angle allows for faster cutting rates on avariety of everyday cutting requirements. Positive Rake design is generally recommended for solids and larger cross sections of material.
Width x Thickness
Inches	mm	T.P.I.	Set	Style	150' Coil Prod. No.	250' Coil Prod. No.
3/4 .035	19 .90	3	RAKER	HOOK	23375	23675
1 .035	27 .90	3/2	**	POSI	23455	23755
1-1/4 .042	34 1.07	3/2 4/3		POSI POSI	23515 23517	23815 23817
1-1/2 .050	41 1.27	6/4 8/5	RAKER RAKER	POSI POSI	23545 23550