PosiTest®
For
the Nondestructive measurement of nonmagnetic coatings
(paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.
- DURABILITY
 Extra rugged housing, not affected
by mechanical shock, water, acid or solvents
Unique overall design,
fully supported, positive positioning, no pivoting tendencies
during measurement
Can be used fully supported or with only
the front probe area contacting the surface
Functions on a permanent
rare-earth cobalt magnet, no battery
Explosion Proof - Refinery safe
1 year warranty
|
 |
- EASY
TO USE
Positive visual and audible indicators to designate
when thickness reading is established
"V" grooves in probe housing and Gage
base allow correct positioning on cylindrical objects
Compact, lightweight, precisely balanced,
Independent of gravity - can be used in any position
GO / NO-GO button can be
preset for rapid measurement
Probe contact and dial rotation all in a one-finger
operation
Furnished with wrist strap, neck strap and instructions
in a high quality leather case with belt loops for your convenience
| For:
Hot dip galvanizing, hard chrome metalizing, paint, enamel,
plastic coatings on steel. |
 |
| Scale
FM |
0-80
mils |
| Tolerance: |
±0.2
mils up to 4 mils
±5% of the reading over 4 mils |
|
| For:
Electroplating, thin paint films, phosphating on steel. |
 |
| Scale
GM |
0-8
mils |
| Tolerance: |
±0.04
mils up to 0.8 mils
±5% of the reading over 0.8 mils |
|
 |
| Scale
F |
0-2000
µm |
| Tolerance: |
±5
µm up to 100 µm
±5% of the reading over 100 µm |
|
 |
| Scale
G |
0-200
µm |
| Tolerance: |
±1
µm up to 20 µm
±5% of the reading over 20 µm |
|
|
