|
Thickness Gauges
Corrosion:
 |
MX
1 |
The
MX-1 a our most basic model. This gauge can be pre-programmed for
a specific material type using a simple PC program. The MX-1 is
an excellent choice for users that measure the same material type
all the time, and do not have the need to re-calibrate to different
materials on the fly.
Note: The material velocity must be known prior to programming.
|
| |
MX
2 |
The
MX-2 has 8 common preset material types and 2 user programmable
types. This makes the MX-2 a little more flexable for those users
that have a need to meausre more than material type. Our simple
PC program allows the user to program the MX-2 for two additional
set material types.
Note: The material velocity must be known prior to programming.
|
 |
MX
3 |
| The
MX-3 is the first model in the MX line with the abiltiy to field
calibrate on the fly. This model offers extreme flexabilty and accuracy
to calibrate to a variety of materials instantly. Simply tell the
MX-3 one known thickness point located on the test material, and
the MX-3 will calculate the material type for you. The MX-3 is also
equiped with a two point calibration option, providing the user
with extreme accuracy. Another special feature of the MX-3 is the
high speed scan mode. In this mode, the MX-3 takes 16 readings per
second rather than 4 readings per second in standard measurement
mode. The readings are viewable while scanning. Simply remove the
transducer from the area being tested and the MX-3 will display
the minimum thickness in the area scanned.
|
 |
MX
5 |
| The
MX-5 has all the features of the MX-3 plus: An audible and visual
alarm mode. In alarm mode, the user can set a nominal thickness
value. When measurements fall above or below the set nominal value,
a red light and audible beeper is displayed and sounded. The MX-5
also features a differential mode. In differential mode, the user
sets a target thickness value and the MX-5 will display the difference
( +/- ) from the target value. The MX-5 is also equiped with an
RS232 port out. This enables the user the ability to send measurements
to an external data collection device or directly to a PC.
|
|
|
MX
5DL |
|
The MX-5DL has all the features of the MX-5 plus: An Internal data
logger that stores a total of 1000 readings in 10 files of 100 readings
each file. This gives the user the ability to store, and download
the stored measurements directly to a PC using our DakView software
program. The software and transfer cable are included in the MX-5DL
kit.
|
 |
The
MMX-6 is a Multi-Mode thickness gauge that has the ability to measure
through painted or coated surfaces and eliminate the thickness of
the paint using a dual element style transducer in echo-echo mode.
The MMX-6 can also effectively find pits and flaws with the press
of a single button. The MMX-6 has all the features of the MX-3 plus:
An audible and visual alarm mode. In alarm mode, the user can set
a nominal thickness value. When measurements fall above or below the
set nominal value, a red light and audible beeper is displayed and
sounded. The MMX-6 is also equiped with an RS232 port out. This enables
the user the ability to send measurements to an external data collection
device or directly to a PC.
|
|
|
MMX
6DL |
|
The
MMX-6DL has all the features of the MMX-6 plus: An Internal data
logger that stores a total of 1000 readings in 10 files of 100 readings
each file. This gives the user the ability to store, and download
the stored measurements directly to a PC using our DakView software
program. The software and transfer cable are included in the MMX-6DL
kit.
|
 |
MVX |
| The
MVX finishes the line of MX gauges with class. This thing is loaded
with all of the features of the MX gauges and a lot more. Four selectable
display options (RF, Rectified, B-Scan, and Large Digits). An Internal
data logger that stores a total of 12,000 readings and waveforems,
64 user custom definable setups, selectable transducer table for improved
linearity, thru paint mode with the single press of a button, multiple
calibration and material selection options, and auto waveform find
- just to mention a few! This is all nicely packaged in a very mini
portable aluminum extrusion for extra durability, not to metion, portability!
The MVXview java based PC software makes this thing a complete kit,
and then some!
|
 |
VX |
| The
VX is our velocity gauge. This gauge has the ability to determine
the velocity of materials by calibrating to a known material thickness.
The VX is typically used to verify material consistency, or determine
a test material type. |
|
