|
Physical
|
| Size: |
Width
(8.5in/216 mm)
Height (6.5 in/165 mm)
Depth (2.0 in/51 mm) |
| Weight: |
2lbs.
10 ounces (1.2 Kg) (with batteries). |
|
Operating Temprature: |
-4
to 122 F (-200 to 500C)
|
| Keyboard: |
Membrane
switch pad with tactile keys.
|
| Case: |
Extruded aluminum body with nickel-plated aluminum end caps (gasket
sealed) |
|
Data
Output:
|
RS232 port out Windows' interface software. |
|
Display: |
Backlit LCD-3.5"W x 2.0"H |
|
Ultrasonic
Specification
|
| Measurement
Modes: |
Pulse-Echo
(flaws, pits)
Echo-Echo (thru paint,
precision delay line) |
| Pulser: |
Tone-burst
(push-pull). Selectable 1, 2, or 4 pulses.
Selectable frequencies (MHz): 0.5, 1, 2.25, 5, Hi Freq. |
| Receiver: |
Low
noise pre-amplifier. Adjustable gain control. |
| Timing: |
160
MHz 10 ppm TCXO controlled digitizer. |
| Memory: |
8
mega-bit non-volatile ram. |
|
Certification
|
| Factory
calibration traceable to national standards. |
|
Warranty
|
|
2 year limited
|
|
Power
Source
|
- Four
1.5V alkaline or 1.2V NiCad C cells
- 100-240
VAC input 12VDC power supply.
- Typically
operates for 30 hours on alkaline and 15 hours on NiCad (charger
not included.)
- Battery
icons indicate remaining life.
|
|
Measuring
|
| Range: |
Measures
from 0.010 to 480 inches (0.63 to 12 Meters) in steel. Switch to
select english or metric units. |
| Resolution:
|
| Standard
Mode: |
.001 inches( 0.01 millimeters) |
| High-Resolution
Mode: |
.0001 inches ( 0.001 mm ) |
| Velocity
Range: |
- .0500
to .3937 in/ms
- 1270
to 10,000 meters/sec
- Selectable
pulse repetition rate
allows for high speed scanning or low power operation.
- Single
and Two point calibration
capability.
|
|
Display
|
| Display
Views: |
- Rectified
(flaw view)
- RF
(full waveform view)
- Digital
thickness readout
- Multi-function
6 digit graphic
- LCD,
backlit for use in poor light conditions.
- Measurements
displayed in inches, inches/microsecond.
- Millimeters
and meters/second.
- Bar
graph indicates stability of reading.
|
|
Data
Logger (Internal)
|
| 1000
pages of memory (alpha numeric storage)-1 main cell cell reading,
1 waveform, 2 comment lines, and 16 sub readings per page. OBSTRUCT
for indicating inaccessible locations. |
|
Transducer
|
Transducer
Types:
- Dual
Element (1 to 10 MHz)
- Single
Element Contact
(500 KHz to 10 MHz)
- Single
Element Delay Line
(5to22MHz)
- Locking
quick disconnect
- "00"
LEMO connectors.
- Standard
4 foot cable.
- Custom
transducers and lengths cables available for special applications.
|
|
Features
|
| Setups: |
25
manufacturer presets that can be edited by the user. |
| Gates: |
2
fully functional gates with adjustable thresholds.Windows' PC interface
|
| Software: |
Bi-directional
transfers of grid data, waveforms, and setups. |
| Full
Feature Lockout |
Password
locks or enables some of the advanced features.
-
Locked: Use THOR as a digital thickness gauge.
- Unlocked:
THOR is a fully functional A-Scan scope.
|
|
Warranty
|
| 2
years limited |
