Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 

Contact Us for additional information

Dakota Ultrasonics supply a wide variety of Ultrasonic Industrial ultrasonic testing equipment.

THE PX 7 - Precision Thickness Gauges

The PX - 7 includes these features:

THE PX SERIES of Precision Thickness gauges utilize state-of -the-art digital technology to produce fast and accurate readings. The gauges are designed with the user in mind. They are PACKAGED in an all aluminum sealed case making it resistant to the working environment. The gauges are simple to operate and are loaded with the FEATURES you have requested: Alarm Mode, Differential Mode, Internal Data-Logging and RS-232 data output port to interface with a com-puter or other data acquisition system.The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials in ECHO-TO-ECHO MODE and automatically switch to INTERFACE-ECHO MODE when measuring thicker materials and plastics. THE PX-7'S echo-to-echo mode offers the user the ability to measure the thickness of materials without removing the paint or the coating.
PX - 7 Specifiacations
Physical
Size: 2.5Wx4.5Hx1.24Dinches
(63.5Wx114.3Hx31.5Dmm).
Weight: 10 ounces (with batteries).
Operating Temprature:

-20° to 120°F (-30° to 50°C).
Case: Extruded aluminum body with
nickel-plated aluminum end
caps. Sealed connectors and
end caps
Keypad
  • Sealed membrane that is resistant to both water and petroleum products.
  • 9 tactile-feedback keys.
Transducer
  • Single element with delay tip. Locking quick disconnect
  • LEMO connector. 4 foot cable (1.2 meters).
  • Custom transducers available for special applications.
Warranty
5 year limited
Power Source
  • Two 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for150 hours with alkaline and 100 hours with NiCad.
  • Display flashes when battery is low. Unit turns off automatically when battery is too low to
    operate reliably.
Display
  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in
    poor light conditions.
  • Backlight is selectable
  • on / off / auto (illuminates only
    when taking a measurement).
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
  • Bar graph indicates stability of reading.
Certification
Factory calibration traceable to national standards.
Internal Data Logger (PX - DL only)
  • Automatic Data Logging System 1000 reading capacity, (10 files of 100 readings each).
  • OBST indicates no reading.
  • Complete with data acquisition software and cable.
Measuring
Range: Measures from 0.0060 to 1.0000 inch (0.15 to 25.40 millimeters). Switch to select English or Metric units.
Resolution: 0.0001 inch (0.001 millimeter)
Velocity Range: 0.0492 to .3937 in./Ns. (1250 to 10,000 meters/second).
Mesuring Modes
  • Interface to Echo, Echo-to-Echo (through paint) and Auto-Switchable.
  • Four readings per second for single point measurements or 8 per second in Scan Mode captures the minimum thickness.
  • Single point calibration.
Features
Differential Mode: Enter acceptable thickness value, unit will display +/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls outside Hi/Lo limits, red LED will illuminate and sounds beeper. If measurement is between Hi/Lo limits, green LED will illuminate.
Data Output: RS-232 output sends data to a serial printer, a computer or other external storage device.
Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com