|
Physical
|
| Size: |
Width:
(2.5in./63.5 mm.)
Height: (6.5 in./165 mm.)
Depth:1.24 in./31.5 mm.) |
| Weight: |
13.5
ounces (with batteries). |
| Keyboard: |
Membrane
switch pad with twelve tactile keys. |
|
Operating Temprature: |
14°
to 140°F (-10°C to 60°C) |
| Case: |
Extruded
aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Data
Output: |
Bi-directional
RS232 serial port. Windows® PC interface software. |
| Display: |
1/8in.
VGA grayscale display (240 x 160 pixels). Viewable area 2.4in. x
1.8in. (62m. x 45.7mm). EL backlit (on/off/auto). |
|
Ultrasonic
Specifications
|
| Measurement
Modes: |
- Pulse-Echo
(Precision-General purpose).
- Interface-Echo
(Precision-Thick materials
|
| Echo-Echo: |
(Precision-Thin materials & thru-paint). |
| Pulser: |
Square
wave pulser with adjustable pulse width (spike, thin, wide). |
| Receiver: |
Manual
or AGC gain control with 40dB range, depending on mode selected. |
| Timing: |
40
MHz with ultra low power 8 bit digitizer. |
|
Power
Source
|
- Three
1.5V alkaline or 1.2V NiCad AA cells.
- Typically
operates for 150 hours on alkaline and 100 hours on NiCad (charger
not included.)
- Auto
power off if idle 5 min.
- Battery
status meter.
|
|
Warranty
|
|
2 year limited
|
|
Measuring
|
| Range: |
| Interface-Echo
Mode: |
Steel
.050in.-1.0in. (1.27mm-25.4mm). Plastics from .005in. (.127mm). |
| Echo-Echo
Mode: |
Steel
.006in.-.500in. (1mm-12.7mm). |
| Pulse-Echo
Contact: |
Steel
.040in.-10.0in. (1 mm-254mm). Plastics from .010" (.254mm). |
| Echo-Echo
Contact: |
Steel
thru-paint .100in-3.0in. (2.54mm-76.2mm). |
| Resolution
|
+/-
.001 in. (0.01 mm)
+/- .0001 in. (0.001 mm) |
| Velocity
Range: |
.0492
to .5510 inches/Ns 1250 to 9999 meters/sec One and Two Point calibration
option, or selection of basic material types. |
| Units: |
English
& Metric |
|
Display
|
| Display
Views: |
A-Scan
|
Rectified
+/- (half wave view) RF (full waveform view) |
| B-Scan |
Time
based cross section view. Display speed of 15 secs per screen. |
| Large
Digits |
Standard
thickness view. Digit Height: 0.400 in. (10mm) |
| Scan
Bar Thickness |
6
readings per second. Viewable in B-Scan and Large Digit views. |
| Repeatability
Bar Graph |
Bar
graph indicates stability of reading. |
|
Data
Logger (Internal)
|
- 12,000
readings and waveforms (alpha numeric storage).
- OBSTRUCT
to indicate inaccessible locations.
|
| Memory: |
16
megabit non-volatile ram. |
|
Transducer
|
| Transducer
Types: |
- Single
Element (1 to 20 MHz).
- Locking
quick disconnect "00" LEMO connector.
- Standard
4 foot cable.
- Custom
transducers and cable lengths available.
|
|
Features
|
| Setups: |
16
factory and 48 custom user-defined setups. |
| Gates: |
Single
gate with holdoff in interface-echo, echo-echo, and plastics mode.
Adjustable threshold. |
Multiple
Measurement Modes:
|
Selectable
modes for use with a variety of applications. |
| Alarm
Mode: |
Set
Hi and Lo tolerances with audible beeper and visual LEDs. |
| Fast
Scan Mode: |
Takes
32 readings per second and displays the minimum reading found when
the transducer is removed. Display continuously updates while scanning. |
|
Certification
|
| Factory
calibration traceable to national standards. |
