|
Physical
|
| Size: |
2.5Wx4.5Hx1.24Dinches
(63.5Wx114.3Hx31.5Dmm). |
| Weight: |
10
ounces (with batteries). |
|
Operating Temprature: |
-200
to 1200 F (-300 to 500C).
|
| Case: |
Extruded
aluminum body with nickel-plated aluminum end caps (gasket sealed). |
|
Keypad
(all Mx Units)
|
| Sealed
membrane that is resistant to both water and petroleum products. |
|
Transducer
|
| Dual-element
(transmit and receive). 1 to 10 MHz frequency range. Locking quick
disconnect LEMO connectors. 4 foot cable. Custom transducers available
for special applications. |
|
Power
Source .
|
- Two
1.5V alkaline or 1.2V NiCad AA cells.
-
Typically operates for 200 hours on alkaline and 130 hours
on NiCad.
-
Display flashes when battery is low. Unit turns off automatically
when battery is too low to
operate reliable.
|
|
Display
|
- Multi-function
4.5 digit liquid crystal display with 0.500 inch numerals, backlit
for use in poor light conditions.
- Backlight
is selectable on /off /auto (illuminates only when taking a
measurement).
- Measurements
displayed in inches, inches/microsecond, millimeters, and meters/second.
- Bar
graph indicates stability of reading.
|
|
Certification
|
| Factory
calibration traceable to national standards. |
|
Internal
Data Logger(MX-5DL only)
|
- Automatic
numeric Data Logging system 1 to 1000 readings.
- OBST
indicates no reading
|
|
Warranty
(all MX units)
|
| 5
year limited. |
|
Measuring
(all MX units)
|
| Range: |
Measures
from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Switch
to select English or Metric units.
|
|
Resolution:
|
0.001
inch (0.01 millimeter) |
| Velocity
Range: |
- 0.0492
to .3937 in./ps. (1250 to 10,000 meters/second)
- Four
readings per second for single point measurements or 16 per
second in Scan Mode captures the minimum thickness.
- Single
and two point calibration option included
|
|
Features
|
| Differential
Mode: |
Enter
acceptable thickness value, unit will display+/- the difference
from the value entered. |
| Alarm
Mode: |
Enter
a minimum acceptable thickness value. If measurement falls below
minimum, red LED will illuminate and sound beeper. If measurement
is above minmum value, green LED will illuminate. |
| Data
Output: |
RS232
output sends data to a serial printer, a computer or other external
storage device. |
