Deterco, Inc.
Quality Products & Services
For Your Measurement Needs

 

Contact Us for additional information

Dakota Ultrasonics supply a wide variety of Ultrasonic Industrial ultrasonic testing equipment.

Multi-M Mode Thickness Gauges - MMX- 6

The MMX - 6 includes these features:

These gauges are the answer to both versatility and convenience in every way! The MMX series
defines versatility by combining features like: Fast Scan, Alarm (audible/visual), and data logging, along with multi-mode for reading through and eliminating the thicknessof painted or coated materials. The MMX demonstrates convenience by making all these features available to the user with just the touch of a button.Conveniently toggle between pulse-echo mode(detect flaws & pits), and echo-echo mode (eliminate paint & coating thickness), to cover all your inspection requirements. No need
to remove or allow for errors due to paint and coatings. The MMX gauges use a highly damped dual element style transducer for both modes, eliminating the need to switch between transducer types.

The MMX gauges are packaged in an all aluminum sealed case, making them rugged and resistant to the working environment and includes 5 Year Limited Warranty.
MMX - 6 Specifiacations
Physical
Size: 2.5Wx4.5Hx1.24Dinches
(63.5Wx114.3Hx31.5Dmm).
Weight: 10 ounces (with batteries).
Operating Temprature:

-200 to 1200 F (-300 to 500C).
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Keypad
Sealed membrane that is resistant to both water and petroleum products.
Transducer
  • Dual-element (transmit and receive).
  • 1 to 10 MHz frequency range.
  • Special high-damped transducers available for Through Paint & Coating measurements.
  • Locking quick disconnect LEMO connectors.
  • 4 foot cable.
  • Custom transducers available for special applications.
Power Source .
  • Two 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.
  • Display flashes when battery is low. Unit turns off automatically when battery is too low to
    operate reliably.
Display
  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Backlight is selectable on /off /auto (illuminates only when taking a measurement).
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
  • Bar graph indicates stability of reading.
Certification
Factory calibration traceable to national standards.
Internal Data Logger (MMX-6DL only)
  • Automatic numeric Data Logging system 1 to 1000 readings.
  • OBST indicates no reading
Warranty
5 year limited.

Measuring

Range:

Pulse-Echo Mode

(Pit & Flaw Detection)
measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters). Switch to select English or Metric units
Resolution:
 0.001 inch (0.01 millimeter)
Velocity Range: 0.0492 to .3937 in./µs. (1250 to 10,000 meters/second)
Built in:
  • Stainless steel reference disk for probe
  • Four readings per second for single point measurements or 16 per second in
Scan Mode:
  • captures the minimum thickness.
  • Single and two point calibration option included
Features
Differential Mode: Enter acceptable thickness value, unit will display+/- the difference from the value entered.
Alarm Mode: Enter a minimum acceptable thickness value. If measurement falls below minimum, red LED will illuminate and sound beeper. If measurement is above minmum value, green LED will illuminate.
Data Output: RS232 output sends data to a serial printer, a computer or other external storage device.
Prepaid wire transfer required for all international orders
 [Home] [About Us] [Products] [Services] [What's New] [Tech. Info] [Contact Us] [Leasing]
All Copyrights reserved by Deterco, Inc. 2007
Tel: (713) 943-2721 e-mail: sales@deterco.com