|
Physical
|
| Size: |
Width
(2.5in./63.5mm.)
Height (6.5in./165mm.)
Depth (1.24in./31.5mm.) |
| Weight: |
13.5
ounces (with batteries). |
| Display: |
Membrane
switchpad with twelve tactile keys. |
| Operating
Temprature: |
14°F
to 140°F (-10°C to 60°C). |
| Case: |
Extruded
aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Data
Output : |
Bi-directional
RS232 serial port.
Windows® PC interface software. |
| Display: |
1/8in.
VGA grayscale display (240 pixels x 160 pixels).
Viewable area 2.4in. x 1.8in. (62mm. x 45.7mm.)
EL backlit (on/off/auto).
|
|
Ultrasonic
Specifications
|
| Measurement
Modes: |
Pulse-Echo
(standard)
Pulse-Echo w/Gate (fine adjust) |
| Pulser: |
Square
wave pulser with
adjustable pulse width (spike, thin, wide). |
| Receiver: |
Manual
or Auto Set gain control with 40dB range. |
| Timing: |
10-bit
250 MHz digitizer |
|
Warranty:
|
2
year limited. |
|
Power
Source
|
Three
1.5V alkaline or 1.2V NiCad AA cells.
Typically
operates for 150 hours on alkaline and 100 hours on NiCad (charger
not included).
Auto
power off if idle for 5 min.
Battery
status icon.
|
|
Measuring
|
| Range: |
From
1 in. to 48in. |
| Time: |
Nanoseconds. |
| Elongation: |
Change
in length (inches/millimeters). |
| Load: |
Force
load applied (pounds kPSI or megapascals MPa). |
| Stress: |
Force
for unit area stress applied (inches per inch or millimeters per
millimeter). |
| Resolution: |
+/-
0.00001 in. (0.0001 mm.) |
| Velocity
Range : |
0.0492
to .3937 in/ms (1250 to 9,999 meters/sec)
Fixed,
Single, and Two-point zero calibration options.
Select
bolt material types from a preset or custom list.
|
| Units:
|
English
& Metric / Farenheit & Centigrade |
|
Display
|
| A-scan: |
Rectified
+/- (half wave view), or RF (full waveform view). |
| Large
Digits : |
Display
and toggle between nanoseconds, elongation, load, stress, and strain. |
|
Limits
Bar :
|
(alarm
limits)- Set Hi & Lo alarm limits for displaying an acceptable
tolerance range. |
| Repeatability
Bar Graph: |
Bar
Graph-Bar graph indicates stability of measurement. |
|
Data
Logger
|
| Memory:
|
16
megabit non-volatile ram. |
|
Transducer
|
| Transducer
Type : |
Single
element (1 MHz to 10 MHz & 1/8in. to 1 in. diameters).
Locking
quick disconnect "00" LEMO connectors.
Standard
10 foot cable.
Custom
transducers available for special applications.
Temperature
probe for automatic temperature compensation.
|
|
Features:
|
| Setups: |
64
custom user defined setups.
Factory setups can also be edited by the user. |
| Gate: |
Gate
used to fine adjust where the detection point occurs. |
| Alarm
Limits : |
Set
Hi and Lo tolerances with audible beeper, viewable scan bar,
and visual LEDs. |
| Auto
Set : |
Locates
the detection signal, optimizes the gain setting, and adjusts the
overall display to show the waveform and detection point automatically. |
| Field
Calibration : |
Vector
& linear regression. |
| Certification: |
Factory
calibration traceable to national standards. |
