Thread
Height Gages
Thread Height Gauges for All External Threads and
for Internal Threads in Sizes 3 1/2" and larger.
5226
Gauge
Type: Height Gauge
Thread Form: "V" Thread Form/API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: This gauge is designed to give a direct
value for thread height measurement when used in
conjunction with the 6780-L setting standard for
"V" Threads. The measurement shown indicates the
actual thread height.
5226-A
Gauge Type: Height Gauge
Thread Form: "V" Thread Form/ API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~100, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5226-A is an External Thread Height
Gauge used on all API "V" Thread Forms and indicates
product error when used in conjunction with the
6780-L Setting Standard. By first "zeroing" your
height gauge on the Setting Standard, the product
error is read on the dial. The measurement taken
then indicates the deviation from the API Nominal,
not the actual thread height. This gauge also features
a Revolution counting hand on the indicator.
5226XR
Gauge Type: Height Gauge
Thread Form: "V" Thread Form/ API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: This gauge is designed to give a direct
value for thread height measurement when used in
conjunction with the proper setting standard for
"V" Threads. The measurement shown indicates the
actual thread height. This gauge is specially equipped
with extended travel to permit measurements of deeper
thread forms.
5226-AXR
Gauge Type: Height Gauge
Thread Form: "V" Thread Form/ API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5226-AXR is an External Thread
Height Gauge used on all API "V" Thread Forms and
indicates product error when used in conjunction
with the 6780-L Setting Standard. By first "zeroing"
your height gauge on the proper setting standard,
the product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. This gauge
is specially equipped with extended travel to permit
measurements of deeper thread forms. This gauge
also features a Revolution counting hand on the
indicator.
5886
Gauge Type: Height Gauge
Thread Form: "V" Thread Form/API Line Pipe
Size Range: All External Thread Diameters and Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: This 5886 is one of the most popular
of the "V" Thread Height gauges because it can be
used externally on any diameter as well as Internally
on the larger sized connections. It is designed
to give a direct value for thread height measurement
when used in conjunction with the 6780-L Setting
Standard for "V" Threads. The measurement shown
indicates the actual thread height.
5886-A
Gauge Name: Height Gauge
Thread Form: "V" Thread Form/API Line Pipe
Size Range: All External Thread Diameters and Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 6709-M is an External Thread Height
Gauge used on all API Round Thread Forms and indicates
product error when used in conjunction with the
6780-J Setting Standard. By first "zeroing" your
height gauge on the 6780-L setting standard, the
product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. This gauge
also features a Revolution counting hand on the
indicator.
5886XR
Gauge Type: Height Gauge
Thread Form: "V" Thread Form
Size Range: All External Thread Diameters and Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: This gauge is used the same as the
normal 5886, giving actual thread height measurement.
However this gauge is specially equipped extended
travel permitting measurements of the deeper thread
forms.
5886-AXR
Gauge Type: Height Gauge
Thread Form: "V" Thread Form
Size Range: All External Thread Diameters and Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ¼" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 5886-AXR is an External Thread
Height Gauge used on all API Round Thread Forms
and indicates product error when used in conjunction
with the 6780-J Setting Standard. By first "zeroing"
your height gauge on the proper setting standard,
the product thread height error is read on the dial.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
The indicator on this height gauge has extended
travel to allow measurement of the deeper thread
forms. This gauge also features a Revolution counting
hand on the indicator.
5886-C
Gauge Type: Height Gauge
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters
from 4 ½" to 13 3/8".
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special feature
specifically for Buttress Casing is that the measuring
contact is located closer to the back of the anvil.
This allows the user to record height readings closer
to the "black thread" area while always resting
on perfectly formed threads
.
Description: The 5886-C is an External Thread Height
Gauge used on External and Internal API Buttress
Casing threads ranging from 4 ½" to 13 3/8". By
first "zeroing" your height gauge on the 1233-A
setting standard, the product error is read on the
dial. The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator and is equipped with a Tungsten
Carbide Ball Point.
5886-B
Gauge Type: Height Gauge
Thread Form: Improved Buttress Tubing
Size Range: External and Internal Threads in sizes
of 3 ½"-5-1/2"
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, 60 degree V cross section,
Dial Face perpendicular to thread axis. The anvil
on the 5886-B is specially designed for the measuring
of Improved Buttress Tubing (0-45 Degree Flank Angles).
This special design utilizes a locator pin and an
indented anvil to allow the 36 Degree Cone Point
to rest perfectly at the root of the thread in order
to get the most accurate reading.
Description: The 5886-B is used only on the external
Improved Buttress Tubing threads. By first "zeroing"
your height gauge on the 1231-E setting standard,
the product thread height error is read on the dial.
The measurement taken then indicates the deviation
from the nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator.
5886-B16
Gauge Type: Height Gauge
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters
from 16" to 20".
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, "V" cross section, specially
designed to keep the measuring axis perpendicular
to the pipe axis, Dial Face perpendicular to thread
axis
Description: The 5886-B-16 is an External Thread
Height Gauge used only on External and Internal
API Buttress Casing threads ranging from 16"~ 20".
By first "zeroing" your height gauge on the 1233-SB-16
setting standard, the product error is read on the
dial. The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator and is equipped with a .072 diameter
Ball Point.
5886-G
Gauge Type: Ring Groove Height Gauge
Thread Form: Ring Grooves on Couplings
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: 1/8" minimum
Anvil: Hardened steel, "V" cross section, specially
designed to keep the measuring axis perpendicular
to the pipe axis, Dial Face perpendicular to thread
axis
Description: This 5886-G is used to record a measurement
of groove eccentricity. It is specially equipped
with cylindrical contact point, which enables a
firm contact with the groove. The measurement shown
indicates the actual thread height relative to the
bottom of the groove. A measurement can be made
either by rotating the coupling while measuring
or by obtaining several different readings.
5887
Gauge Type: Height Gauge
Thread Form: API Rotary Shouldered Connections
Size Range: All External Threads and for Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0-50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: 1/4" minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special design feature
allows the user to record height readings closer
to the collar on Rotary Shouldered Connections.
.
Description: The 5887 is an External Thread Height
Gauge used on all API Rotary Shouldered Connections.
When set to the proper setting standard, such as
the 6 870-S-11 or 6780-S-12, actual thread height
measurement on most Rotary Shouldered and other
Drill Pipe Connections can be accurately determined.
It can also be used on other types of connections
such as H-90, BECO, etc. In addition to the offset
anvil, this gauge is specially equipped with an
extended range indicator and a Tungsten Carbide
Contact Point.
6709-L
Gauge Type: Height Gauge
Thread Form: API 8 & 10 Round Thread Forms
Size Range: All External Threads and for Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: ~0.130"
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 6709-L is an External Thread Height
Gauge used on all API Round Thread Forms and is
gives a direct value for thread height measurement
when used in conjunction with the 6780-J Setting
Standard. It can be used externally on all pipe
sizes and Internally on the larger diameter connections.
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
contact point location. The measurement shown indicates
the actual thread height.
Setting Standards/ Matching setting standards for
various thread connections are also available.
 Contact
Points
 6709-M
Gauge Type: Height Gauge
Thread Form: API 8 & 10 Round Thread Forms
Size Range: All External Threads and for Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ~0.130"
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 6709-M is an External Thread Height
Gauge used on all API Round Thread Forms and indicates
product error when used in conjunction with the
6780-J Setting Standard. It can be used on all pipe
sizes and Internally on the larger diameter connections.
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
Contact Point location. By first "zeroing" your
height gauge on the 6780-J setting standard, the
product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. It also features
a Revolution counting hand on the indicator and
a Tungsten Carbide Cone Point.
6710
Gauge Type: Height Gauge
Thread Form: API 8&10 Round Thread Form
Size Range: All External Threads and for Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: ~0.130"
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special shortened
anvil permits the contact surface to rest only on
the fully formed threads when inspecting small diameter
tubing.
Description: The 6710 is an External Thread Height
Gauge used on all API Round Thread Tubing and gives
a direct value for thread height measurement when
used in conjunction with the 6780-J Setting Standard.
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
contact point location. The measurement shown indicates
the actual thread height.
6711
Gauge Type: Height Gauge
Thread Form: API 8&10 Round Thread Form
Size Range: All External Threads and for Internal
Thread sizes of 3 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ~0.130"
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special shortened
anvil permits the contact surface to rest only on
the fully formed threads when inspecting small diameter
tubing.
Description: The 6711 is an External Thread Height
Gauge used on all API Round Thread Tubing and indicates
product error when used in conjunction with the
6780-J Setting Standard. A specially designed two
piece Cone Point system allows the outer Self Centering
Cone to rest on the thread flanks, while guiding
the inner contact point into the exact center of
the root radius. This prevents measurement errors
caused by incorrect contact point location. By first
"zeroing" your height gauge on the 6780-J setting
standard, the product error is read on the dial.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
It also features a Revolution counting hand on the
indicator and a Tungsten Carbide Contact Point.
5226M
Gauge Type: Height Gauge, Metric
Thread Form: "V" Thread Form/ API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5226M is an External Thread Height
Gauge used on all API "V" Thread Forms and indicates
product error when used in conjunction with the
6780-L Setting Standard. By first "zeroing" your
height gauge on the Setting Standard, the product
error is read on the dial. The measurement taken
then indicates the deviation from the API Nominal,
not the actual thread height. This gauge also features
a Revolution counting hand on the indicator.
5226-MXR
Gauge Type: Height Gauge, Metric
Thread Form: "V" Thread Form/ API Line Pipe
Size Range: All External Thread Diameters
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 6mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5226-MXR is an External Thread
Height Gauge used on all API "V" Thread Forms and
indicates product error when used in conjunction
with the 6780-L Setting Standard. By first "zeroing"
your height gauge on the proper setting standard,
the product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. This gauge
is specially equipped with extended travel to permit
measurements of deeper thread forms. This gauge
also features a Revolution counting hand on the
indicator.
5886M
Gauge Name: Height Gauge, Metric
Thread Form: "V" Thread Form/API Line Pipe
Size Range: All External Thread Diameters and Internal
Thread sizes of 89mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 5886M is an External Thread Height
Gauge used on all API Round Thread Forms and indicates
product error when used in conjunction with the
6780-L Setting Standard. By first "zeroing" your
height gauge on the 6780-L setting standard, the
product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. This gauge
also features a Revolution counting hand on the
indicator.
5886-MXR
Gauge Type: Height Gauge, Metric
Thread Form: "V" Thread Form
Size Range: All External Thread Diameters and Internal
Thread sizes of 89mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 6mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 5886-MXR is an External Thread
Height Gauge used on all API Round Thread Forms
and indicates product error when used in conjunction
with the 6780-L Setting Standard. By first "zeroing"
your height gauge on the proper setting standard,
the product thread height error is read on the dial.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
The indicator on this height gauge has extended
travel to allow measurement of the deeper thread
forms. This gauge also features a Revolution counting
hand on the indicator.
5886CM
Gauge Type: Height Gauge, Metric
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters
from 114mm to 339mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01 mm
Dial Travel: 3 mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special feature
specifically for Buttress Casing, is that the measuring
contact is located closer to the back of the anvil.
This allows the user to record height readings closer
to the "black thread" area while always resting
on perfectly formed threads.
Description: The 5886CM is an External Thread Height
Gauge used on External and Internal API Buttress
Casing threads ranging from 114mm to 339mm. By first
"zeroing" your height gauge on the 1233-A setting
standard, the product error is read on the dial.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator and is equipped with a Tungsten
Carbide Ball Point.
5886BM
Gauge Type: Metric Height Gauge, Metric
Thread Form: Improved Buttress Tubing
Size Range: External and Internal Threads in sizes
of 89mm to 393mm
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, 60 degree V cross section,
Dial Face perpendicular to thread axis. The anvil
on the 5886BM is specially designed for the measuring
of Improved Buttress Tubing ( 0-45 Degree Flank
Angles). This special design utilizes a locator
pin and an indented anvil to allow the 36 Degree
Cone Point to rest perfectly at the root of the
thread in order to get the most accurate reading.
Description: The 5886BM is used only on the external
Improved Buttress Tubing threads. By first "zeroing"
your height gauge on the 1231-E setting standard,
the product thread height error is read on the dial.
The measurement taken then indicates the deviation
from the nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator.
5886-MB-16
Gauge Type: Height Gauge, Metric
Thread Form: API Buttress Casing
Size Range: External and Internal Thread Diameters
from 406mm to 508mm.
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, specially
designed to keep the measuring axis perpendicular
to the pipe axis, Dial Face perpendicular to thread
axis
Description: The 5886-MB-16 is an External Thread
Height Gauge used only on External and Internal
API Buttress Casing threads ranging from 114mm to
339mm By first "zeroing" your height gauge on the
1233-SB-16 setting standard, the product error is
read on the dial. The measurement taken then indicates
the deviation from the API Nominal, not the actual
thread height. This gauge also features a Revolution
counting hand on the indicator and is equipped with
a 1.82mm diameter Ball Point.
5886-GM
Gauge Type: Ring Groove Height Gauge, Metric
Thread Form: Ring Grooves on Couplings
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: .01mm
Dial Travel: 3mm minimum
Anvil: Hardened steel, "V" cross section, specially
designed to keep the measuring axis perpendicular
to the pipe axis, Dial Face perpendicular to thread
axis
Description: This 5886-GM is used to record a measurement
of groove eccentricity. It is specially equipped
with cylindrical contact point, which enables a
firm contact with the groove. The measurement shown
indicates the actual thread height relative to the
bottom of the groove. A measurement can be made
either by rotating the coupling while measuring
or by obtaining several different readings.
5887M
Gauge Type: Height Gauge, Metric
Thread Form: API Rotary Shouldered Connections
Size Range: All External Threads and for Internal
Thread sizes of 89mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: 6mm minimum
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special design feature
allows the user to record height readings closer
to the collar on Rotary Shouldered Connections.
.
Description: The 5887M is an External Thread Height
Gauge used on all API Rotary Shouldered Connections.
When set to the proper setting standard, such as
the 6870-S-11 or 6780-S-12, actual thread height
measurement on most Rotary Shouldered and other
Drill Pipe Connections can be accurately determined.
It can also be used on other types of connections
such as H-90, BECO, etc. In addition to the offset
anvil, this gauge is specially equipped with an
extended range indicator and a Tungsten Carbide
Contact Point.
6709MM
Gauge Type: Height Gauge, Metric
Thread Form: API 8 & 10 Round Thread Forms
Size Range: All External Threads and for Internal
Thread sizes of 89mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: ~3mm
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis.
Description: The 6709MM is an External Thread Height
Gauge used on all API Round Thread Forms and indicates
product error when used in conjunction with the
6780-J Setting Standard. It can be used on all pipe
sizes and Internally on the larger diameter connections.
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
Contact Point location. By first "zeroing" your
height gauge on the 6780-J setting standard, the
product error is read on the dial. The measurement
taken then indicates the deviation from the API
Nominal, not the actual thread height. It also features
a Revolution counting hand on the indicator and
a Tungsten Carbide Cone Point.
6711M
Gauge Type: Height Gauge, Metric
Thread Form: API 8&10 Round Thread Form
Size Range: All External Threads and for Internal
Thread sizes of 89mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ~3mm
Anvil: Hardened steel, "V" cross section, Dial Face
perpendicular to thread axis. A special shortened
anvil permits the contact surface to rest only on
the fully formed threads when inspecting small diameter
tubing.
Description: The 6711M is an External Thread Height
Gauge used on all API Round Thread Tubing and indicates
product error when used in conjunction with the
6780-J Setting Standard. A specially designed two
piece Cone Point system allows the outer Self Centering
Cone to rest on the thread flanks, while guiding
the inner contact point into the exact center of
the root radius. This prevents measurement errors
caused by incorrect contact point location. By first
"zeroing" your height gauge on the 6780-J setting
standard, the product error is read on the dial.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
It also features a Revolution counting hand on the
indicator and a Tungsten Carbide Contact Point.
Contact
Points: CP 120503/ T.S.
Cone point for external V thread gauges
CP
12050/ T.S. Cone point for internal V thread
gauges
CP 32050/ T.C. inner cone
point for external round thread gauges
CP 32050S/ T.C. inner cone
point for internal rount thread gauges
10642/Self-Centering Cone Point for int/ext round thread
gauges
56785-A
5785-A
Gauge Type: Internal Height Gauge
Thread Form: "V" Thread Form/API Line Pipe
Size Range: Internal Threads 1 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ~0.130"
Arm Reach: 4 ½"
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5785-A is an Internal Thread Height
Gauge used on all API "V" Thread Forms and indicates
product error when used in conjunction with the
6780-L Setting Standard. It is a scissor type design
for use on small diameter couplings, enabling the
measuring point to be placed up to 4-1/2" from the
end. By first "zeroing" your height gauge on the
proper setting standard, the product error is read
on the dial. The measurement taken then indicates
the deviation from the API Nominal, not the actual
thread height. This gauge also features a Revolution
counting hand on the indicator.
5785-D
Gauge Type: Internal Height Gauge
Thread Form: "V" Thread Form/API Line Pipe
Size Range: Internal Threads 1 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: ~0.130"
Arm Reach: 4 ½"
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5785-A is an Internal Thread Height
Gauge used on all API "V" Thread Forms and gives
a direct value for thread height measurement when
used in conjunction with the 6780-L Setting Standard.
It is a scissor type design for use on small diameter
couplings while enabling the measuring point to
be placed up to 4-1/2" from the end. The measurement
shown indicates the actual thread height.
7705-A
Gauge Type: Internal Height Gauge
Thread Form: API 8 &10 Round Thread Forms
Size Range: Internal Threads 1 ½" & Larger
Dial Type: 0~10~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.0005"
Dial Travel: ~0.130"
Arm Reach: 4 ½"
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description:
The 7705-A is an Internal Thread Height Gauge used
on all API Round Thread Forms and indicates product
error when used in conjunction with the 6780-J Setting
Standard. It is a scissor type design for use on
small diameter couplings, enabling the measuring
point to be placed up to 4-1/2" from the end but
can be used on all coupling sizes greater than 1-1/2".
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
contact point location. The 7705-A is used by first
zeroing your height gauge on the setting standard
and then recording the deviation from the API Standard.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator and a Tungsten Carbide Cone Point.
7705-D
Gauge Type: Internal Height Gauge
Thread Form: API 8 &10 Round Thread Forms
Size Range: Internal Threads 1 ½" & Larger
Dial Type: 0~50, Counter-Clockwise
Graduation: 0.001"
Dial Travel: ~0.130"
Arm Reach: 4 ½"
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 7705-D is an Internal Thread Height
Gauge used on all API Round Thread Forms and is
gives a direct value for thread height measurement
when used in conjunction with the 6780-J Setting
Standard. It is a scissor type design for use on
small diameter couplings, enabling the measuring
point to be placed up to 4-1/2" from the end but
can be used on all coupling sizes greater than 1-1/2".
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
contact point location. The measurement shown indicates
the actual thread height.
5785-M
Gauge Type: Internal Height Gauge, Metric
Thread Form: "V" Thread Form/API Line Pipe
Size Range: Internal Threads 38mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: ~3mm
Arm Reach: 114mm
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description: The 5785M is an Internal Thread Height
Gauge used on all API "V" Thread Forms and indicates
product error when used in conjunction with the
6780-L Setting Standard. It is a scissor type design
for use on small diameter couplings, enabling the
measuring point to be placed up to 114.3mm from
the end. By first "zeroing" your height gauge on
the proper setting standard, the product error is
read on the dial. The measurement taken then indicates
the deviation from the API Nominal, not the actual
thread height. This gauge also features a Revolution
counting hand on the indicator.
7705M
Gauge Type: Internal Height Gauge, Metric
Thread Form: API 8 &10 Round Thread Forms
Size Range: Internal Threads 38mm & Larger
Dial Type: 0~50~0, Balanced w/ Revolution Counting
Hand
Graduation: 0.01mm
Dial Travel: ~3mm
Arm Reach: 89mm
Anvil: Hardened steel, "V" cross section, Dial Face
parallel to thread axis.
Description:
The 7705M is an Internal Thread Height Gauge used
on all API Round Thread Forms and indicates product
error when used in conjunction with the 6780-J Setting
Standard. It is a scissor type design for use on
small diameter couplings, enabling the measuring
point to be placed up to 89mm from the end but can
be used on all coupling sizes greater than 38mm.
A specially designed two piece Cone Point system
allows the outer Self Centering Cone to rest on
the thread flanks, while guiding the inner contact
point into the exact center of the root radius.
This prevents measurement errors caused by incorrect
contact point location. The 7705M is used by first
zeroing your height gauge on the setting standard
and then recording the deviation from the API Standard.
The measurement taken then indicates the deviation
from the API Nominal, not the actual thread height.
This gauge also features a Revolution counting hand
on the indicator and a Tungsten Carbide Cone Point.
|
Thread
Height Gauges for All External Threads
and for Internal Threads in Sizes 3 1/2"
and larger.
|
| Tool
No. |
Dial
Type |
Anvil
Position |
Thread
Form |
| 5226 |
0-100 |
Parallel |
V |
| 5226-A |
0-10-0 |
Parallel |
V |
| 5886 |
0-100 |
Rt.
Angle |
V |
| 5886-A |
0-10-0 |
Rt.
Angle |
V |
| 5886-B16 |
0-10-0 |
Rt.
Angle |
Butt
Csg. 16to 20 |
| 5886-C |
0-10-0 |
Rt.
Angle |
Butt
Csg. 4 1/2to 13 3/8" |
| 6709-L |
0-100 |
Rt.
Angle |
Round |
| 6709-M |
0-10-0 |
Rt.
Angle |
Round |
| 6710 |
0-100 |
Rt.
Angle Short |
Round |
| 6711 |
0-10-0 |
Rt.
Angle Short |
Round |
| 5226M |
0-50-0 |
Parallel |
V |
| 5226MXR |
0-50-0 |
Parallel |
V |
| 5886M |
0-50-0 |
Perpendicular |
V |
| 5886-MXR |
0-50-0 |
Perpendicular |
V |
| 5886CM |
0-50-0 |
Perpendicular |
V |
| 5886BM |
0-50-0 |
Perpendicular |
V |
| 5886-MB-16 |
0-50-0 |
Perpendicular |
V |
| 5886-GM |
0-10-0 |
Perpendicular |
V |
| 5887M |
0-50-0 |
Perpendicular |
V |
| 6709MM |
0-50-0 |
Perpendicular |
V |
| 6711M |
0-50-0 |
Perpendicular |
V |
Setting Standards/ Matching setting standards for
various thread connections are also available:
|
